Instruction manual

Instruction 19-9326

Monoxor III

5.4 Water Trap / Filter Maintenance

The Water Trap / Filter Assembly removes water condensate from the gas

sample, and also prevents soot from contaminating the internal compo-

nents of the analyzer.

Drain the water condensate after every test.

Procedure:

1. Pull apart the Water Trap / Filter assembly (see Figure 5-2).

2. Pour out all water condensate; then reassemble the trap.

Replace the Filter Element when dirty.

Material Required: Filter Element, P/N 07-1644

Procedure:

1. Pull apart the Water Trap / Filter assembly (see Figure 5-2).

2. Pry apart the Filter Chamber; then remove and discard old lter.

3. Install new lter and reassemble trap, making sure that surfaces

“A” and “B” are in contact.

Figure 5-2. Water Trap / Filter Assembly





 















 

 





