Owner's Manual

PCA

3 Manual
30 0024-9472 Rev 2
4.10. Print Pressure Selection
Select whether to print or not print the pressure measurement on the combustion
test printout as follows.
1. Display the MAIN MENU by pressing the MENU (F2) button. If
necessary, press ESC until MENU appears above F2.
2. Use the ▲▼ buttons to highlight SETUP, and then press ENT to display
the SETUP MENU.
3. Use the ▲▼ buttons to highlight PRINT PRESSURE, and then press
ENT to display the PRINT PRESSURE screen.
4. Use the ▲▼ buttons to highlight either No (do not print pressure) or Yes
(print pressure). In the example shown, Yes has been selected.
5. Press ENT to save the selection and re-display the SETUP MENU.
Figure 4-9. Print Pressure Selection
4.11. Zoom Display Selection
Combustion test data in the Run/Hold screen can be shown with enlarged
characters to make viewing easier. The operator can set zoom levels to
Standard, 2X, or 3X. The Standard zoom setting will display seven lines of
combustion test data at one time, 2X which will display five lines of combustion
test data with enlarged characters, and 3X which will display four lines of
combustion test data with enlarged characters. The operator can scroll through
the complete list of measured and calculated data no matter what zoom level has
been selected. Select desired zoom level as follows:
1. Display the MAIN MENU by pressing the MENU (F2) button. If
necessary, press ESC until MENU appears above F2.
2. Use the ▲▼ buttons to highlight SETUP, and then press ENT to display
the SETUP MENU.
3. Use the ▲▼ buttons to highlight ZOOM, and then press ENT to display
the ZOOM screen.
4. Use the ▲▼ buttons to select the desired Zoom level. Options include
STANDARD, 2X, and 3X. Standard will display seven lines of
Combustion test data, 2X will display five, and 3X will display four.
5. Press ENT to save the selection and re-display the SETUP MENU.