Specifications

PCA
4.6 Sensor Status Screen
BACHARACH, INC.
PCA xx
WARMUP 0
z
Where: xx = Instrument Model Number
z = Sensor(s) in error
Operation
If a problem with one or more of the sensors was detected during
warmup, the Sensor Status Screen will display an error code for those
sensors at the bottom of the screen and wait for operator intervention.
Refer to Section 7.2 for a listing and explaination of the error codes.
Note that the analyzer will not automatically switch to the Combustion
Test Screen if a sensor error was detected. The analyzer, however, can
still be used to perform any test that does not depend on the sensor that
is in error. Press the RUN key to manually enter the Combustion Test
screen to continue using the analyzer.
Front Panel Key Functions:
– No Action
– No Action
– No Action
– Go to Combustion Test Screen
– No Action
Instruction 0024-9219 4-9