Specifications

PCA
4.17 Display Mode Setup Screen
(For PCA Models 30, 35, 60 & 65)
SETUP
DISPLAY «CO NX
CF NF
Operation
The Display Setup Screen is displayed by repeatedly pressing the MENU key
from the Combustion Test Screen. Use this screen to select whether the
Combustion Test Screen will display the measured values of Carbon
Monoxide and Nitric Oxide (CO and NX), or the calculated values of these
gases (CF and NF) referenced to Oxygen.
NOTE: The levels of CO, NX, CF and NF are always in-
cluded on the printout and in the downloaded data of each
combustion test, regardless of what is being displayed on the
Combustion Test Screen.
To setup the display, first use the st keys to move the cursor ( z ) in front
of either CO NX (measured values), or CF NF (calculated values), and
then press the
ENTER key.
Front Panel Key Functions:
– Move cursor ( z ) up
– Move cursor ( z ) down
– Select Display Mode next to cursor
– Go to Combustion Test Screen
– Go to Time/Date Setup Screen
Instruction 0024-9219 4-23