Specifications

Operation
4.18 Time / Date Setup Screen
SETUP
« TIME 03:12:45 pm
D A T E 02/24/01
PCA
The Time/Date Setup Screen is displayed by repeatedly pressing the MENU
key from the Combustion Test Screen. Use this screen to enter the cur-
rent time and date as follows:
Use the st keys to move the cursor ( z ) in front of the TIME or DATE
field to be changed, and then press the ENTER key to move the cursor
inside the selected field. Again press the
ENTER key to select the field
position to change; after which, use the
st keys to increase or decrease
the value of that field. Continue using the ENTER and st keys until all
values within the chosen field are correct; then press RUN to save all field
values and return the cursor to the left side of the screen.
Front Panel Key Functions:
– Move cursor ( z ) up, or Increase value in selected field
position
– Move cursor ( z ) down, or Decrease value in selected field
position
– S elect Time or Date field to be changed as selected by the
cursor's position, and then use to move the cursor through
the field positions
– Go to the Combustion Test Screen, or save the time and date
values and return cursor to left side of screen
– Go to Setup / Printer Screen, or return cursor to left side of
screen
4-24 Instruction 0024-9219