Specifications

PCA Operation
Press ENTER to save the selected character and advance to the next posi-
tion. If you make a mistake, press ENTER until the cursor is over the wrong
character and make your correction by again using the st keys.
After all the desired characters have been selected, press RUN to save the
text line and return to the initial User Name Screen.
Front Panel Key Functions for Individual User Name Screens:
– Increment character
–
D ecrement character
– Select the displayed character and advance to the next
character position
–
Save the text line and return to the initial User Name Screen
– Abort any changes to the text line and return to the initial
User Name Screen
4.23 Saving Test Data
O2 4.0 CO 12 HLD DRAFT
C2 9.5 NX 15 NG DRAFT – 0.25 WC
TA 68.0 TS 374 P HOT SPOT 374 °F P
EF 82.6 EA 21 «S « S
To save the data displayed in either the Combustion Test or Draft
Screen, first use the st keys to move the cursor ( z ) in front of the save ( S )
function and then press the ENTER key. The displayed data will be saved in
memory, and can be recalled at a later time for viewing from the
Memory
Directory Screen (Section 4.10).
NOTE: Data will be automatically stored in the next free
memory location. After all memory locations are filled, any
additional data that is saved will start overwriting data
starting at the first memory location.
Instruction 0024-9219 4-29