Specifications

Operation
4.25 Clear Memory Screen
CLEAR MEMORY
C
«E
PCA
The Clear Memory Screen is accessed from either the Memory Directory
Screen (Section 4.10) or the Memory to PC Screen (Section 4.11).
To clear all memory locations, use the st keys to move the cursor ( z ) in
front of the clear ( C ) function, and then press the ENTER key.
To return to the previous screen without clearing memory, place the cursor
(
z ) in front of the exit ( E ) function and press ENTER.
4.26 Resetting the Microprocessor
If the analyzer “locks-up” and cannot be turned OFF, reset the micropro-
cessor by pressing the RESET button (Figure 4-7). The button can be
activated using the end of a paper clip.
RESET
BUTTON
Figure 4-7. Reset Button
4-32 Instruction 0024-9219