Specifications

PCA

4. Press ENT to save the selection and display the Combustion Test

HOLD screen. Observe that the name of the selected fuel should

now appear at the top of the screen.

NOTE: In addition to the standard fuels programmed

into the PCA

3, Bacharach can develop custom fuel codes

based on the customers speciﬁ c needs. The PCA

3 can be

programmed with 2 additional fuels which can be added

to the instrument using the Fyrite User Software. Consult

factory for price and delivery.

3.6 Temperature Units Selection

Select to display temperature in either °F or °C as follows:

1. Display the MAIN MENU by

pressing the MENU (F2) button. If

necessary, press ESC until MENU

appears above F2.

2. Use the ▲▼ buttons to highlight

SETUP, and then press ENT to

display the SETUP MENU.

3. Use the ▲▼ buttons to highlight

TEMP UNITS, and then press ENT to

display the TEMP UNITS MENU.

4. Use the ▲▼ buttons to highlight the

desired temperature units. In the

example shown, Fahrenheit has been

selected.

5. Press ENT to save the selection and

re-display the SETUP MENU.