Specifications

PCA

3.10 Time Setup

The time is stored in the format: hh:mm:ss AM/PM. Its value is part of the

date and time stamp that is save along with each combustion test record.

Set the analyzer’s internal clock to the current time as follows:

1. Display the MAIN MENU by

pressing the MENU (F2) button. If

necessary, press ESC until MENU

appears above F2.

2. Use the ▲▼ buttons to highlight

SETUP, and then press ENT to

display the SETUP MENU.

3. Use the ▲▼ buttons to highlight

TIME, and then press ENT to display

the TIME MENU.

4. First use the ◄► buttons to move

the cursor across the screen until it

is over the digit to be change, and

then press the ▲▼ buttons until the

desired value is displayed

5. Repeat Step 4 until the values for

hour, minute, and meridian have

been set.

NOTE: The value for seconds cannot

be entered, but are displayed and

stored as part of the combustion test

record.

6. Press ENT to save the displayed time

values and re-display the SETUP

MENU, or press ESC to abort this

procedure and retain the old time

values.