Specifications

PCA
®
3
30
3.12 Print Pressure Selection
Select whether to print or not print the pressure measurement on the
combustion test printout as follows:
1. Display the MAIN MENU by
pressing the MENU (F2) button. If
necessary, press ESC until MENU
appears above F2.
2. Use the ▲▼ buttons to highlight
SETUP, and then press ENT to
display the SETUP MENU.
3. Use the ▲▼ buttons to highlight
PRINT PRESSURE, and then
press ENT to display the PRINT
PRESSURE screen.
4. Use the ▲▼ buttons to highlight
either No (do not print pressure) or
Yes (print pressure). In the example
shown, Yes has been selected.
5. Press ENT to save the selection and
re-display the SETUP MENU.