Specifications

PCA

3.16 Test ID Information

Test records can be identiﬁ ed (e.g. customer’s name, burner number, and

location) by manually entering up to three lines of text, with each line

containing a maximum of 20 alphanumeric characters. When a Test ID

is selected this information will be associated with all succeeding test

records, and will appear at the top of each test record when printed, and

in CSV ﬁ les when records are downloaded to a PC. The chosen Test ID

remains in effect until it is deselected, a new Test ID is selected, or the

instrument is turned off. Up to 30 Test ID’s can be pre-entered for later

retrieval.

TIP: To save time Test ID information can be entered using

the Fyrite User Software.

To enter or edit a Test ID:

1. Display the MAIN MENU by

pressing the MENU (F2) button. If

necessary, press ESC until MENU

appears above F2.

2. Use the ▲▼ buttons to highlight

SETUP, and then press ENT to

display the SETUP MENU.

3. Use the ▲▼ buttons to highlight

TEST ID, and then press ENT to

display the TEST ID menu

4. Use the ▲▼ buttons to highlight

EDIT TEST ID, and then press ENT

to display the EDIT TEST ID menu,

which displays the ﬁ rst line of each

Test ID record.

5. Use the ▲▼ buttons to select which

Test ID to edit and then press ENT to

display all three lines of that record.

Periods (.....) are used to identify

empty lines.

6. Use the ▲▼ buttons to choose which of the three Test ID lines to

edit and then press ENT to begin editing the chosen line.

7. Use the ▲▼ buttons to enter the desired character and then

move to the next character position by pressing the right arrow

key. Repeat this step until the line is complete. A maximum of 20

characters can be entered. Press ENT to accept the information.