Specifications

PCA
®
3
34
8. At this time, either return to Step 6 to choose another line to edit,
or end this procedure by highlighting Edit Complete and pressing
the ENT key to return to the Edit Test ID Menu.
9. Press ESC to go to the Test ID Menu or the RUN/HOLD key to
return to the Run/Hold screen.
Select a Test ID:
1. From the Test ID menu, use the ▲▼
buttons to highlight SELECT TEST
ID, and then press ENT to display
the SELECT TEST ID menu, which
displays the fi rst line of each Test ID
record.
2. Use the ▲▼ buttons to choose a
pre-entered Test ID or choose NO
Test ID (located at bottom of list) to
deselect a previously chosen record,
then press ENT to make the selection and return to the Test ID
menu.
3. Press ESC to end the procedure and return to the Setup Menu or
press the RUN/HOLD key to return to the Run/Hold Screen.
Clear Test ID Information:
1. From the Test ID menu, use the ▲▼
buttons to highlight CLEAR TEST
ID, and then press ENT to display the
CLEAR TEST ID menu.
2. Do one of the following to clear
Individual Records or All Records.
*Individual Records - Use the ▲▼
buttons to highlight Individual
Records, then press ENT to display
the Clear Individual menu. Again use the ▲▼ buttons to
highlight the individual record to clear, then press ENT to
clear the record.
*All Records - Use the ▲▼ buttons to highlight All
Records, then press ENT to display the Clear All menu.
Again use the ▲▼ buttons to highlight Yes, then press
ENT to clear all records.
3. Press ESC to end this procedure and return to the Test ID menu
or press the RUN/HOLD key to return to the Run/Hold screen.