Specifications

PCA

3.19 Cal Reminder Period

The analyzer can be set to indicate a calibration reminder during the 60

second warm-up period. Calibration reminders can be preset to occur

never, 6, 8, 10, 12, or 15 months after the last calibration. When the

preset period is exceeded the instrument will display the reminder, and

how long since the sensors were last calibrated. The reminder will be

displayed at the end of the 60 second warm-up period. If a calibration

reminder is displayed the operator can press the RUN/HOLD key to

move to the Run/Hold screen for normal operation. Regular calibration

periods of 6 months to a year for all gas sensors (except Oxygen) are

recommended.

Set the calibration reminder period as follows:

1. Display the MAIN MENU by

pressing the MENU (F2) button. If

necessary, press ESC until MENU

appears above F2.

2. Use the ▲▼ buttons to highlight

SETUP, and then press ENT to

display the SETUP MENU.

3. Use the ▲▼ buttons to highlight

CAL REMINDER PERIOD, and then

press ENT to display CAL Reminder

Period Menu.

4. Use the ▲▼ buttons to highlight the

desired CAL reminder period, and

then press the ENT key to activate

the selection and re-display the Setup

Menu.

NOTE: The date and time settings

must be correct to get accurate cal

reminders.