Specifications

PCA
®
3
40
Change the order in which data is displayed as follows:
1. Display the MAIN MENU by
pressing the MENU (F2) button. If
necessary, press ESC until MENU
appears above F2.
2. Use the ▲▼ buttons to highlight
SETUP, and then press ENT to
display the SETUP MENU.
3. Use the ▲▼ buttons to highlight
RUN/HOLD FORMAT, and then
press ENT to display Run/Hold
Format Menu.
4. Use the ▲▼ buttons to highlight
Edit Format, and then press the
ENT key to show the Edit Run/Hold
Format, where the current order of
combustion data is displayed.
5. Change data shown for a particular
location by fi rst using the ▲▼
buttons to highlight the location.
Then press the ENT key to select the
location; the cursor will start to fl ash.
6. Use the ▲▼ buttons to scroll
through and select the desired data
to appear at that location. Press the
ENT key to make the selection.
7. Change data displayed at other
locations by repeating Steps 5 & 6.
8. When fi nished, use the ▼ button to
highlight Edit complete at the bottom
of the list, then press ENT to save the
new display format and return to the
Run/Hold Format screen.