Specifications

PCA

4.6 Temperature Label Selection &

Measurement

The difference in temperature between two areas can be measured by

using the analyzer’s two temperature channels and the Temperature

screen. By using the T-Air channel as a reference, the temperature

applied to the T-Stack channel will be displayed on the Temperature

Measurement screen as differential temperature between the two

channels. Additionally, the temperature measurement can be labeled.

Label types include differential temperature across heat exchange or dif-

ferential temperature. Perform a differential temperature measurement

as follows:

1. Display the MAIN MENU by

pressing the MENU (F2) button. If

necessary, press ESC until MENU

appears above F2.

2. Use the ▲▼ buttons to highlight

TEMPERATURE, and then press

ENT to display the TEMPERATURE

MEASUREMENT screen.

3. Install thermocouples in both

temperature channel connectors.

4. Before taking a measurement, the

temperature channels may need to be

zeroed, if not already displaying zero

with both thermocouples exposed to

the same condition. Press ZERO (F2)

if needed.

5. To label the data use the ◄►

buttons to scroll through the

available temperature label types.

The current label will be used, saved,

and printed with the record.

6. Press ENT to save the

selection and re-display the

TEMPERATURE MENU or ESC to exit back to the Main Menu