Specifications

PCA
®
3
54
4.13.2 Setting the Logging Interval and Duration
The logging interval is the length of time between measurements, while
the logging duration is the time allocated to the logging process. Set the
logging interval and duration as follows:
TIP: If the duration is set for more than 10 hours, we
recommend using the optional AC power adapter to power
the analyzer.
1. As soon as logging is turned ON
as described in Section 4.14.1, the
LOGGING INTERVAL screen
appears.
2. Use the ▲▼ buttons to highlight the
desired interval, and then press ENT
to make the selection and display
the LOGGING DURATION screen.
In this example, 1 minute has been
selected.
3. Use the ▲▼ buttons to highlight the
desired duration, and then press ENT
to make the selection and display
the LOGGING SUMMARY screen.
In this example, 2 hours has been
selected.
NOTE: If the selected duration
requires more memory than is
currently available, the analyzer
will automatically select the longest
duration possible for the selected
interval.