Specifications

PCA
®
3
58
4.14.2 Recalling Logged Test Data
Recall individual logged combustion test data records as follows:
1. Display the MAIN MENU by
pressing the MENU (F2) button. If
necessary, press ESC until MENU
appears above F2.
2. Use the ▲▼ buttons to highlight
MEMORY, and then press ENT to
display the MEMORY MENU.
3. Use the ▲▼ buttons to highlight
LOGGING DIRECTORY, and then
press ENT to display the LOGGING
DIRECTORY screen.
4. Use the ▲▼ buttons to highlight
the desired data logging location to
be recalled. Each logging location is
identifi ed by the date and time at
which the data was saved. The word
EMPTY signifi es that the logging
location does not contain data.
5. Press ENT to display the logging data
contained in the selected memory
location.
Note the following:
• The top line of the log test data
screen shows the log location being
viewed. In this example, “Log: 1” is
being displayed.
• The recalled logged test data can be
printed by pressing the PRINT (F1)
button (refer to Section 4.18).