Specifications

PCA
®
3
59
4.14.3 Clearing Memory
When all memory locations used to store
individual combustion test records have been
fi lled, the next combustion test record saved
will not overwrite the oldest.
When all logging memory locations in the
logging directory are full, they must be
manually cleared in order to store new data.
At no time will the logging process overwrite
older data.
Each memory bank can be individually
cleared, or all memory locations in both
banks can be cleared simultaneously.
Do the following to clear memory:
1. Display the MAIN MENU by
pressing the MENU (F2) button. If
necessary, press ESC until MENU
appears above F2.
2. Use the ▲▼ buttons to highlight
MEMORY, and then press ENT to
display the MEMORY MENU.
3. Use the ▲▼ buttons to highlight one
of the following:
• CLEAR MEMORY DATA
clears only the individual saved
combustion test records.
• CLEAR LOGGING DATA clears only the combustion
test records that were saved during the logging
process.
• CLEAR ALL MEMORY clears all memory locations in
both memory banks.
4. Press ENT to display the CLEAR MEMORY, LOGGING, or
ALL DATA conformation screen. Highlight YES to confi rm
that memory is to be cleared, and then press ENT to actually
clear memory as evidenced by the display of the “WAIT Erasing
memory” screen.