Specifications

PCA

5.3 B-Smart

Sensor Replacement &

Calibration

To replace a B-Smart

sensor and calibrate, do the following:

1. Enter the CALIBRATION MENU per Section 5.2.

2. Use the ▲▼ buttons to select B-SMART

. Press ENTER to display

the B-Smart code screen

3. Use the ▲▼ buttons to enter the 10 or 14 digit alphanumeric code

supplied with the B-Smart

sensor. Use the ◄► buttons to move

the cursor across the screen. Press ENTER.

NOTE: There are two B-Smart

sensor code lengths. 10

digits for CO

High

, NO, NO

, and SO

, and 14 digits for

Low

NOTE: If the correct code was entered, the analyzer

accepts it and returns to the CALIBRATION MENU.

If an incorrect code was entered, the screen will display

“Invalid Code”. Check to make sure the correct code has

been entered. If the problem persist, contact your nearest

Bacharach Service Center.

TIP: To save time B-Smart

codes can be entered using the

Fyrite User Software.

Bacharach also offers a convenient Exchange Program that allows the

customer to regularly send in old sensors and, as scheduled, receive

calibrated replacements. Contact Bacharach customer service for more

details about the Exchange Program.