Specifications

Pur•Chek

™

Instruction 2100-9000 5

3 Components

3.1 Base Unit

The Pur•Chek™ base unit houses the Graphic Display, Infrared Bench, Electrical Connections, and Optional

Printer Module. These components require no maintenance, therefore there are no serviceable components

internal to the instrument, and disassembly will void the warranty.

Printer Door

Air Intake Port

Sample Filter

Control Panel

3.2 R12 Sample Hose

The 6-foot (1.8 meter) R12 Sample Hose is constructed of a nylon inner tube and a polyurethane outer tube.

The inner tube will handle all of the refrigerant transfer and will provide containment up to 300psig. The outer

tube will provide protection of the inner tube from abrasion, nicking, cutting, etc. The hose is provided with an

instrument inlet port mating connector on one end and a 1/4” SAE female ﬂ are coupling nut on the service end.

Service End

(1/4 SAE Flare Nut)

Identifier End

3.3 AC Power Adapter

The Pur•Chek™ is powered via a 110/220 VAC power transformer. This transformer is included with each unit

and converts a standard 110/220 wall outlet to 12 VDC to power the device. An optional internal and recharge-

able battery kit is available separately. Note: Use of any other power source may cause damage to the unit

and void the warranty.