id R22 R22 Refrigerant Indentifier Instruction 2100-9002 Operation and Maintenance Rev.
WARRANTY Bacharach, Inc. warrants to Buyer that at the time of delivery this Product will be free from defects in material and manufacture and will conform substantially to Bacharach Inc.’s applicable specifications. Bacharach’s liability and Buyer’s remedy under this warranty are limited to the repair or replacement, at Bacharach’s option, of this Product or parts thereof returned to Seller at the factory of manufacture and shown to Bacharach Inc.
Contents 1 Introduction ...................................................................................................1 1.1 How to Use This Manual ...........................................................2 1.2 Warnings and Cautions .............................................................2 1.2.1 Identifier Warnings ..........................................................2 1.2.2 General Warnings & Cautions .........................................3 1.3 Features and Capabilities..................
NOTES
R•22 id Instruction 2100-9002 1 Introduction Thank you for purchasing the Bacharach R•22id Refrigerant Identifier. The Bacharach R•22id is an economical instrument designed to provide a “PASS” or “FAIL” indication for R22 purity. The product will also indicate if an excess amount of non-condensable gas (air) is present in the system. Excess “air” will cause poor cooling performance and can be easily corrected by simply recovering the refrigerant, evacuating and recharging the system.
R•22 id Instruction 2100-9002 1.1 How to Use This Manual This manual provides important information on how to operate and maintain Bacharach’s R•22id Refrigerant Analyzer. To assure operator safety and proper use of the R•22id, please read, understand, and follow the contents of this manual. 1.2 Warnings and Cautions WARNING: This symbol and/or the use of the word WARNING indicates a potential hazard associated with the use of this equipment.
R•22 id Instruction 2100-9002 1.2.2 General Warnings & Cautions • Always inspect the sample hose before each use. Replace the hose if it appears cracked, frayed, obstructed or fouled with oil. • Always turn the AC system off before connecting the instrument to an air conditioning system. • Always wear eye and skin protection when working with refrigerants. Escaping refrigerant vapors will present a freezing danger.
R•22 id Instruction 2100-9002 1.3 Features and Capabilities The R•22id Refrigerant Identifier is a highly advanced instrument capable of identifying R22 purity.
R•22 id Instruction 2100-9002 2 Operation 2.1 Components BASE MODULE SPARE FILTER CONNECTOR WITH FILTER 2.2 Using the Instrument WARNING: Be sure to turn off the system to be tested and let it rest for 3 minutes before using the R•22id to analyze its refrigerant purity. 1. Remove the rubber protective boot and insert the 9V battery. NOTE: A Lithium battery is recommended for longest life.
R•22 id Instruction 2100-9002 2. Turn on the power switch located on the top of the unit. For battery operation, press the switch to “BAT.” For auxiliary power operation, connect the optional auxiliary power supply to the bottom of the unit and press the switch to “AUX.” 3. The lights will sequence, press “NEXT” to begin the “WARM UP.” 4. After approximately 90 seconds, the “CALIBRATING” light will flash. 5. Press “NEXT.” 6. The “CALIBRATING” light will illuminate for approximately 60 seconds.
R•22 id Instruction 2100-9002 3 Troubleshooting Unit Fails to Power On: Check the battery and replace with a fresh one. If using the optional auxiliary power supply, ensure that the power plug is fully inserted into the power socket on the unit. Excess Air / Fail: The R•22id is equipped with a unique filter located between the coupler and hose. This is a disposable filter designed to trap oil and sealant to prevent damage to the unit. Remove and inspect the filter for oil etc. and replace if necessary.
R•22 id Instruction 2100-9002 4 Service Centers Service and replacement parts can be found by contacting any of the following Bacharach Service Centers: United States Bacharach, Inc. 621 Hunt Valley Circle New Kensington, PA 15068 Phone: 724-334-5000; press 2 at prompt Fax: 724-334-5723 Email: help@mybacharach.com Canada Bacharach of Canada, Inc. 20 Amber St. Unit #7 Markham, Ontario L3R SP4 Canada Phone: 905-470-8985 Fax: 905-470-8963 Email: bachcan@idirect.
R•22 id Instruction 2100-9002 NOTES: 9
R•22 id Instruction 2100-9002 NOTES: 10
R•22 id Instruction 2100-9002 NOTES: 11
World Headquarters: 621 Hunt Valley Circle, New Kensington, PA 15068 Phone: 724-334-5000 • Toll Free: 800-736-4666• Fax: 724-334-5001 Website: www.mybacharach.com • Email: help@mybacharach.
