Specifications

46 Instruction 3015-4148
If the current Zone Screen appears normal, scroll through the displays using the NEXT/BACK keys or the
UP/DOWN cursor keys until you locate the affected zone. You can further investigate the status of the
affected zone by pressing the adjacent key and going to that Zone’s Setup Screen #1 (Page
41). You may
also press the ALARMS key to go directly to the Alarm Summary Screen (Page
50). Refer to Working with
Alarms on Page
50 to learn more about responding to alarms.
Fault Conditions
If a system malfunction occurs, the yellow FAULT LED will glow. Additionally, an external alarm device may
activate and an audible alarm may sound if those features have been enabled (Pages
28 & 35).
From the top level Zone Screen (Page
44), press the SYSTEM key to go to the System Screen (Page 31)
and then press the FAULTS key to go to the Fault Screen (Page
54). Refer to Working with System Faults
on Page
54 to learn more about responding to system faults.