Datasheet
bachmann.com
|
7
IT power distribution
IT power distribution
Integration of devices installed in series
∙ Customised solutions in series quality possible
∙ Integration of up to 2 HP (36mm) wide devices installed in series
∙ Selective, extremely compact fusing in the rack possible
∙ Use of RCD systems (residual current circuit breakers) possible
∙ Use of RCM systems (residual current monitoring) possible
∙ Integration of pulsed current meter possible
RCD (residual current protection device) RCM (residual current monitor)
RCD is the internationally recognised
abbreviation for Residual Current
Protective Device.
If an insulation error causes a danger-
ous contact voltage, RCDs have the job
of interrupting all the poles on operating
equipment within 0.2 or 0.4s.
RCM is the internationally recognised
abbreviation for Residual Current
Monitor.
The use of an RCM allows drops in the
level of insulation (creepage / leakage
currents) of a power supply to be
detected during operation before a
high residual current causes protective
devices to trip.
The
advantages
at a glance