User manual

Chapter 4: Using the web interface
Managing LAN network users 107
4444
Using the web interface
2. Click Edit next to the entry you want to edit, or click Add at the bottom of
the list.
3. Click Add next to a network device you want to use, or type in the MAC
address manually at the top of the page.
4. Select the LAN port and Network user group you want to associate with
the device.
User groups are created and defined in the Network user group page. See
Setting up the network user groups on page 100.
5. Click Apply.
Your changes now appear in the Network classification table.
Note
If you leave a field empty, it is the same as a “wild card” and it
will be shown as an Asterisk in the Network classification table.
Unless you are using a Static IP address, the IP address field
should always be left empty.