User manual

Chapter 4: Using the web interface
Administration 131
4444
Using the web interface
Setting up user permissions
You can restrict access to parts of the web interface for non-administrator
users.
To set up the user permissions, do as follows:
1. From the left navigation pane, select ADMINISTRATION > User
permissions.
2. For each item under ALLOW USERS TO:, select
• yes to allow access or
• no to block access to the settings.
3. Under ALLOW AT COMMANDS ON:, select
• yes to allow the use of AT commands on the LAN interface, or
• no to block the use of AT commands on the LAN interface.