User manual

Chapter 2: Getting started
22 Connecting the IP handset
Connecting the IP handset
Power supply
The Thrane & Thrane IP handset is powered from the LAN interface, using
Power over Ethernet.
Starting up the IP handset
The following procedure is for the Thrane & Thrane IP handset. The procedure
may be different for another type of IP handset.
Do as follows:
1. Connect the Thrane & Thrane IP handset to one of the LAN (PoE)
connectors on the terminal as described in the user manual for the
handset.
The handset starts up automatically.
2. If the PIN has not been entered in the terminal, you can enter the PIN from
the IP handset from the BGAN menu of the handset. If your SIM card uses
a PIN, you cannot connect to the terminal until the PIN is entered.
To enter the PIN, enter the BGAN menu, type in the Administrator user
name and password followed by the PIN for the terminal.
For further information on the IP handset, refer to the user manual for the
handset.