User manual

Chapter 2: Getting started
Making the first data connection (LAN) 23
2222
Getting started
Making the first data connection (LAN)
Before connecting to the LAN interface
For the LAN (Local Area Network) interface to work without any further setup,
the computer must be set up to obtain an IP address and a DNS server address
automatically.
Connecting a computer to the LAN interface
Do as follows:
1. Power up your computer.
2. Connect your LAN cable between the network connector on your computer
and one of the LAN connectors on the terminal.
3. When the computer and the terminal are ready, check the connection e.g.
by accessing the built-in web interface of the terminal with your browser.
For further information, see Accessing the web interface on page 55.
You may have to disable the Proxy server settings in your browser. For
further information, see Browser settings on page 54.
For information on how to configure the LAN interface on the terminal, see
Configuring the LAN interface on page 81.