User manual

Chapter 4: Using the web interface
80 Setting up the interfaces
Setting up the interfaces
The SETTINGS page (Antenna properties)
The SETTINGS page shows properties of the connected antenna and contains a
field for enabling or disabling the L-Band interface on the terminal.
To access the SETTINGS page, select SETTINGS from the left navigation pane.
Enabling or disabling the L-Band interface
The L-Band interface is used for connecting a broadband receiver for
reception of position data. To enable or disable the L-Band interface, do as
follows:
1. In the L-BAND CONNECTOR field of the SETTINGS page, select Enable or
Disable.
2. Click Apply.