Specifications

Cl
40
www.milwaukeeinst.com
MW10/MW11
Low cost digital photometers to
measure Free & Total Chlorine
Chlorine is the most commonly used water disinfec-
tant. Applications vary from treatment of drinking
water and wastewater to pool and spa sanitization
and food processing to sterilization.
Milwaukee offers 2 models:
MW10 for measuring free chlorine (0.00
to 2.50 mg/L) and MW11 to measure
total chlorine (0.00 to 3.50 mg/L).
Key features include:
• User friendly;
• Smaller & Ergonomic
case design;
• Inexpensive;
• Larger and Easier to
read Display;
• Good accuracy and
immediate results;
They are supplied with 2 cuvets, 6 reagents, a battery
and instruction manual.
Specifications
MW10 MW11
Free Chlorine Total Chlorine
Range 0.00 to 2.50 ppm 0.00 to 3.50 ppm
Resolution 0.01 ppm 0.01 ppm
Accuracy ±0.03 ppm ±3% of reading ±0.03 ppm ±3% of
@ 25 °C reading @ 25 °C
Typical EMC Dev. ±0.01 ppm ±0.01 ppm
Light Source Light Emitting Diode @ 525 nm Light Emitting Diode @ 525 nm
Light Detector Silicon Photocell Silicon Photocell
Method Adaptation of USEPA method Adaptation of USEPA method
330.5. The reaction between 330.5. The reaction between
free chlorine and the DPD free chlorine and the DPD
reagent causes a pink tint in the reagent causes a pink tint in the
sample. sample.
Environment 0 to 50°C (32 to 122 °F) max. 0 to 50°C (32 to 122 °F) max.
95% RH non-condensing 95% RH non-condensing
Battery Type 1 x 1.5V AAA 1 x 1.5V AAA
Auto-Shut Off After 2 minutes of non-use After 2 minutes of non-use
Dimensions 81.5 x 61 x 37.5 mm 81.5 x 61 x 37.5 mm
(3.2 x 2.4 x 1.5”) (3.2 x 2.4 x 1.5”)
Weight 64 g (2.25 oz.) 64 g (2.25 oz.)
Accessories
2720116
Free Chlorine powder reagent, (25 pcs)
2
720216
Total Chlorine powder reagent (25 pcs)
3
000100
Glass cuvets with caps (2 pcs)
3
000200
Tissue for wiping cuvets (2 pcs)
3
000300
1.5V AAA batteries (1 pcs)
New
Ordering information:
All handy photometers
are supplied in a carton box including
2 cuvets, 6 reagents, 1 x 1.5 V AAA battery and instructions.