Specifications

This new pH/ORP/ISE/Temp bench meter is ideal for very
accurate and precise measurements for all laboratory
needs. It can perform ion-selective measurements direct-
ly in ppm, as well as pH, ORP and temperature measure-
ments. pH calibration can also be performed in 3 points
selectable between 7 memorized buffers, to provide a
very accurate calibration curve even when testing different
samples, where very wide differences in pH can be found.
Thanks to the memory it can store up to 50 data sets for
each range that can be downloaded to a PC via RS232 or
USB. These instruments also have GLP features so, at any
time, the user can recall the calibration data.
• 7 memorized buffers (pH 1.68, 4.01, 6.86, 7.01, 9.18,
10.01 and 12.45) for pH calibration
• pH calibration up to 3 points
• ISE calibration up to 2 points; six standard solutions
available: 0.01, 0.1, 1, 10, 100, 1000 ppm
• Messages on the LCD to make the calibration
easy and accurate
• Relative mV feature
• GLP feature, to view last calibration data
for pH or ISE
Mi160
pH/ORP/ISE/Temperature Laboratory Bench Meter
pH/ORP
5
www.milwaukeeinst.com
Ordering Information
Mi160 is supplied complete with:
• MA917B/1 Double junction refillable pH electrode
• MA831R Temperature Probe
• MA9315 Electrode Holder
• M10004 pH 4.01 Sachet Buffer Solution
• M10007 pH 7.01 Sachet Buffer Solution
• M10010 pH 10.01 Sachet Buffer Solution
• M10016 Sachet Electrode Cleaning Solution
• Mi5200 Application Software
• MA9350 RS232 connection cable with 2 meters cable
• Graduate Pipet, 12 VDC Adapter & Instruction manual
Specifications Mi160
Range pH -2.00 to 16.00 pH
mV ±699.9 mV / ±2000 mV
ISE 0.001 to 19999 ppm
Temp -20.0 to 120.0°C / -4.0 to 248.0°F
Resolution pH 0.01 pH
mV 0.1 mV / 1 mV
ISE 0.001 (0.001 to 9.999) ppm; 0.01 (10.00 to 99.99) ppm; 0.1 (100.0 to 999.9) ppm;
1 (1000 to 19999) ppm
Temp 0.1°C / 0.1°F
Accuracy pH ±0.01 pH
(@20°C) mV ±0.2 mV / ±1 mV
ISE ±0.5% Full Scale
Temp ±0.4°C / ±0.8°F
Rel mV offset ±2000 mV
pH Calibration 1, 2 or 3 point-calibration, with 7 memorized buffers
ISE Calibration 1 or 2 point calibration, 6 standard solutions available
Temperature Compensation automatic, from -20.0 to 120.0°C / -4.0 to 248.0°F or manual, without temperature probe
pH Electrode MA917B/1 (included)
Temperature Probe MA831R (included)
Environment 0 to 50°C / 32 to 122°F; max RH 95%
Input Impedance 10
12
Ohm
Power Supply 12 VDC power adapter (included)
Dimensions 230 x 160 x 95 mm
Weight 1.1 kg
Easy PC
Compatibility
RS232 or USB communication
interface allows readings to be
downloaded to a serial port.
Accessories
MA9004 pH 4.01 buffer solution, 230 mL bottle
MA9007 pH 7.01 buffer solution, 230 mL bottle
MA9010 pH 10.01 buffer solution, 230 mL bottle
MA9015 Electrode storage solution, 230 mL
MA9016 Electrode cleaning solution, 230 mL
MA9112 pH 12.45 buffer solution, 230 mL
bottle
MA831R Temperature probe
MA9310 12 VDC Adapter, 220 V
MA9311 12 VDC Adapter, 110 V
MA9315 Electrode Holder
MA917B/1Glass body, double junction refillable
pH electrode
MA921B/1 Platinum ORP electrode with 1 m
cable (will be replaced by SE300)
SE300(*) Platinum ORP electrode with 1 m
cable
MA9350 RS232 connection cable with
2 m cable
Mi5200 Application Software
(*) Available from the 1
st
of September 2011
New
Rear Connector Panel layout
Communication to the PC is done via opto-isolated USB
and RS232 ports.