User`s manual

Memory cards and batteries Batteries
5 – 12
5.2.3 Battery installation into the memory card
The battery is not mounted into the battery holder to prevent discharge or short circuit during
transport and storage.
Insert the buffer battery into the memory card before start up.
Battery installation into the SRAM cards Q2MEM-1MBS and Q2MEM-2MBS
Fig. 5-13: Battery installation into memory cards Q2MEM-
NOTE Insert or remove the battery in the horizontal direction along the battery holder fixing guide.
Failure to do so may damage the latches of the battery holder.
Set the battery holder's lock-
ing switch to the "RELEASE"
position.
Battery holder's locking switch
RELEASE position
Remove the battery holder
Set the battery onto the
battery holder with the "plus"
face up.
"+" sign
Insert the battery holder
Confirm that the battery
holder's locking switch is set to
the "LOCK" position.
LOCK
The battery holder's locking switch
is set automatically to the "LOCK"
position when the battery holder is
removed. In this position, insert the
battery holder firmly.
Side with "product
name"
Battery holder
Battery fixing
guide
Battery holder latches