User`s manual

Base units Part names and settings
8 – 12
● When laying an extension cable, secure 55 mm or more as the minimum cable bending
radius. If it is less than 55 mm, a malfunction may occur due to characteristic deterioration,
cable disconnection or the like.
● After fitting the extension cable, always tighten the extension cable connector fixing screws.
(Tightening torque: 0.2 Nm.)
Disconnection of extension cable
When disconnectiong the extension cable, hold and pull the connector part of the extension
cable after confirming that the fixing screws have been completely removed.
Fig. 8-9:
Connection of extension cable connector
with screws