User`s manual

Installation Mounting the base unit
9 – 12
Fig. 9-9: Installing a main base unit, or a Q00U(J)CPU
NOTES Install the main base unit with Q00UCPU or Q00UJCPU to the panel of a cabinet, with no
module mounted in the rightmost slot.
Remove the base unit from the panel after removing the module from the rightmost slot.
The mounting screws (cross recessed head bind screw M4x12) provided with the slim type
main base unit Q32DB, Q33SB and Q35SB differ from those provided with other types of the
base unit.
Fit the two base unit top mounting screws into the
enclosure (e. g. on the backside panel).
Do not yet tighten the mounting screws.
Place the right-hand side notch of the base unit onto
the right-hand side screw.
Place the left-hand side pear-shaped hole onto the left-
hand side screw.
Fit the mounting screws into the holes at the bottom of the
base unit, and then retighten the all mounting screws.