User`s manual

Specifications Input/output module specifications
12 – 36
12.3.23 Transistor output module QY40P

Sink type
Item QY40P

Number of outputs 16
Isolation method Photocoupler
Rated load voltage 12–24 V DC (+20/–15 %)
Maximum load current 0.1 A per output, 1.6 A per module
Maximum inrush current 0.7 A, 10 ms or less
Leakage current at OFF
≤ 0.1 mA
Maximum voltage drop at ON
≤ 0.2 V at 0.1 A
Response time
OFF
→ ON ≤ 1 ms
ON
→ OFF ≤ 1 ms (rated load, resistive load)
Surge suppressor Zener Diode
Fuse —
Protection function Thermal and overload protections
Thermal/overload protection is activated in units of 1 point
Groups of outputs 1; 16 points/common,
(common terminal: TB18)
Output status display One LED per output
Dielectric withstand voltage 560 V AC rms/3 cycles (altitude 2000 m)
External connections 18-point removable terminal block with screws (M3x6)
Applicable wire size
Core cable: 0.3 to 0.75 mm
2
(outside diameter: 2.8 mm max.)
External power
supply
Voltage 12–24 V DC (+20/–15 %, ripple ratio within 5 %)
Current 10 mA (at 24 V DC; all output points ON)
Internal current consumption
(5 V DC)
65 mA (all output points ON)
Weight 0.16 kg
Tab. 12-39: Transistor output module QY40P
External connections
Terminal block
number
Signal
TB1 Y00
TB2 Y01
TB3 Y02
TB4 Y03
TB5 Y04
TB6 Y05
TB7 Y06
TB8 Y07
TB9 Y08
TB10 Y09
TB11 Y0A
TB12 Y0B
TB13 Y0C
TB14 Y0D
TB15 Y0E
TB16 Y0F
TB17 12/24 V DC
TB18 COM
Tab. 12-40: Transistor output module QY40P connections
Internal circuit
TB1
LED
12/24 V DC
TB16
TB17
TB18