User`s manual

Specifications Input/output module specifications
12 – 38
12.3.25 Transistor output module QY41P

Sink type
Item QY41P

Number of outputs 32
Isolation method Photocoupler
Rated load voltage 12–24 V DC (+20/–15 %)
Maximum load current 0.1 A per output, 2 A per module
Maximum inrush current 0.7 A, 10 ms or less
Leakage current at OFF
≤ 0.1 mA
Maximum voltage drop at ON
≤ 0.2 V at 0.1 A
Response time
OFF
→ ON ≤ 1 ms
ON
→ OFF ≤ 1 ms (rated load, resistive load)
Surge suppressor Zener Diode
Fuse —
Protection function Thermal and overload protections
Thermal/overload protection is activated in units of 1 point
Groups of outputs 1; 32 points/common,
(common terminal: A01, A02)
Output status display One LED per output
Dielectric withstand voltage 560 V AC rms/3 cycles (altitude 2000 m)
External connections 40-pin connector
Applicable wire size
0.3 mm
2
Accessories  Connector A6CON
 Assembled cable Q40-CBL-3M/5M with 40 pin plug
External power
supply
Voltage 12–24 V DC (+20/–15 %, ripple ratio within 5 %)
Current 20 mA (at 24 V DC; all output points ON)
Internal current consumption
(5 V DC)
105 mA (all output points ON)
Weight 0.15 kg
Tab. 12-43: Transistor output module QY41P
External connections Pin Signal Pin Signal
B20 Y00 A20 Y10
B19 Y01 A19 Y11
B18 Y02 A18 Y12
B17 Y03 A17 Y13
B16 Y04 A16 Y14
B15 Y05 A15 Y15
B14 Y06 A14 Y16
B13 Y07 A13 Y17
B12 Y08 A12 Y18
B11 Y09 A11 Y19
B10 Y0A A10 Y1A
B09 Y0B A09 Y1B
B08 Y0C A08 Y1C
B07 Y0D A07 Y1D
B06 Y0E A06 Y1E
B05 Y0F A05 Y1F
B04 Vacant A04 Vacant
B03 Vacant A03 Vacant
B02 12/24 V DC A02 COM
B01 12/24 V DC A01 COM
Tab. 12-44: Transistor output module QY41P connections
Pin-Outs
(Module front view)
B20
B1
A1
A20
Internal circuit
B20
LED
12/24 V DC
A05
B01, B02
A01,
A02
The connector is no D-sub type!
(Module front view)