Owner`s manual

ENGLISH

Familiarization

Thank you for choosing the Tracker DTS, the world's first digital

avalanche beacon, and the first beacon with a high-precision

multiple antenna system.

Remember, beacon searches are only part of the avalanche rescue

process. It is equally important to practice the probing and shoveling

techniques found later in this section.

FAMILIARIZATION

Adjustment/Fitting

The Tracker DTS can be worn with or without its harness. The

manufacturer recommends securing it with the harness. When used

with a harness, the Tracker DTS should be worn underneath your

outer garments, as shown in Figure A. Distance/directional display

should be against your body, on/off switch should be exposed and

visible.

To search, remove Tracker from pouch, but keep harness and

lanyard attached to your body. If using without harness, keep

Tracker in a secure pocket, preferably in your pants or other

garment that won't be removed. Attach lanyard clip to zipper or

other solid fixture. If lanyard is removed from harness or clothing for

searching, keep attached to your wrist with loop provided.

Startup/Testing

Turn on the Tracker DTS by depressing and then turning the on/

off switch

u clockwise (see inside front cover). When turned on,

Shoulder Strap

(blue)

Waist Attachment

Buckle

Waist Strap

(black)

Lanyard

Figure A

Harness

Waist Attachment

Buckle

Shoulder Strap

Lanyard

Waist Strap