Assembly Instructions

COLLINS UMBRELLA

SKU# 272-4263

IMPORTANT: PLEASE READ COMPLETE INSTRUCTION SHEET PRIOR TO

ASSEMBLY!

Identify all parts packed in carton against the parts list. Remove all protective

materials, place parts on a nonabrasive surface to avoid scratching. IF ANY PARTS

ARE MISSING OR DAMAGED, DO NOT ATTEMPT TO ASSEMBLE OR RETURN

TO THE STORE. Please contact our customer service center (Monday-Friday 8:30

a.m.-4:30 p.m. CST) at 1-800-426-2950 or e-mail: cs@patiohelpdesk.com.

PARTS LIST

UPPER UMBRELLA

FRAME

LOWER UMBRELLA

POLE

EXTENSION POLE

Step 1

Insert the upper umbrella frame (A) into lower umbrella pole (B). NOTE: If

using the umbrella with the HIGH DINING TABLE, add extension pole (C)

and attach between upper frame (A) and lower pole (B).

Step 2

Before opening umbrella, turn upside down and gently shake to

separate ribs. To open the umbrella: Turn the handle in a clock-

wise direction until fully opened.

Step 3

To tilt umbrella: Fully open umbrella, press in the button, tilt

umbrella into the desired position. WARNING: IF UMBRELLA IS

NOT OPENED COMPLETELY, TILTING IT WILL CAUSE

DAMAGE TO THE UMBRELLA.

WARNING:

• To avoid damage to your table: An umbrella base must be used at all

times.

• If applicable, make sure the plastic umbrella safety ring is installed in

the center of the table before you insert the umbrella pole through the

table.

• Remove umbrella from the table when not in use or in the event of wind,

rain, hail, sleet, snow or any other inclement weather.

2019

Step 4

To close umbrella: Tilt umbrella back to vertical position and crank

counter-clockwise until fully closed.

PAGE 1
COLLINS UMBRELLA SKU# 272-4263 Step 2 Before opening umbrella, turn upside down and gently shake to separate ribs. To open the umbrella: Turn the handle in a clockwise direction until fully opened. IMPORTANT: PLEASE READ COMPLETE INSTRUCTION SHEET PRIOR TO ASSEMBLY! Identify all parts packed in carton against the parts list. Remove all protective materials, place parts on a nonabrasive surface to avoid scratching. IF ANY PARTS ARE MISSING OR DAMAGED, DO NOT ATTEMPT TO ASSEMBLE OR RETURN TO THE STORE.