Assembly Instructions

A
TABLE RIM
1 F
METAL
WASHER M6
8
B
TABLE LEG
4 G
ALLEN
WRENCH
1
C
LEG
CONNECTOR
BRACKET
1 H
GLASS TOP
1
D
PLASTIC
BOLT CAP
M6
8
E
ALLEN BOLT
M6X20MM
8
MAPLE GROVE COFFEE TABLE
SKU# 272-3816
IMPORTANT: PLEASE READ COMPLETE INSTRUCTION SHEET PRIOR TO ASSEMBLY!
Identify all parts packed in carton against the parts list. Remove all protective materials, place parts on a nonabrasive surface
to avoid scratching.
IF ANY PARTS ARE MISSING OR DAMAGED, DO NOT ATTEMPT TO ASSEMBLE OR RETURN TO THE STORE.
Please contact our customer service center (Monday-Friday 8:30 a.m.- 4:30 p.m. CST) at 1-800-426-2950 or e-mail:
[e-mail].
PARTS LIST
Step 1:
Remove the glass (H) from the table rim (A) and set aside vertically in a safe place until the table has been completely
assembled. Place table rim (A) upside down on a flat, soft surface.
Step 2:
Turn the table legs (B) upside down and align with the table rim (A). Using the Allen wrench
(G) secure each leg to the table rim by inserting four bolts (E) and metal washers (F) through each hole on the leg and into the
table rim (A). fig.1 DO NOT TIGHTEN COMPLETELY.
● If not drained properly, water can cause freeze damage.
● Cover furniture with outdoor furniture covers when not in use.
● For safety reasons, do not sit or stand on the table.
Step 3:
Attach the leg connector bracket (C) to the table legs (B) by inserting four bolts (E) and metal washers (F). Tighten all the bolts
completely. Cover the bolts with the plastic bolt caps (D).
Step 4:
Place the table in the upright position. Insert the glass top (H) in the table rim. fig. 2 Your table is now ready for use.
IMPORTANT: To avoid damage to your table:
● In storing patio furniture, do not stack anything on glass, stone or marble table tops.
● Before storing, drain all water that may have accumulated in or around the frames.
2019