Assembly Instructions

A
TABLE TOP 1 G
PLASTIC BOLT
CAP M6
16
B
TABLE LEG 4 H
ALLEN
WRENCH
1
C
LEG
CONNECTOR
BRACKET
1 I
UMBRELLA
CAP
1
D
ALLEN BOLT
M6X35MM
8
FOOT CAP
(FACTORY
ASSEMBLED)
E
ALLEN BOLT
M6X25MM
8
ADJUSTABLE
GLIDER
(FACTORY
ASSEMBLED)
F
METAL
WASHER M6
16
● For safety reasons, do not sit or stand on the table.
IMPORTANT: PLEASE READ COMPLETE INSTRUCTION SHEET PRIOR TO ASSEMBLY!
Identify all parts packed in carton against the parts list. Remove all protective materials, place parts on a nonabrasive surface to avoid scratching.
IF ANY PARTS ARE MISSING OR DAMAGED, DO NOT ATTEMPT TO ASSEMBLE OR RETURN TO THE STORE.
Please contact our customer service center (Monday-Friday 8:30 a.m.- 4:30 p.m. CST) at 1-800-426-2950 or e-mail: [e-mail].
PARTS LIST
Step 3:
Carefully turn the table into the upright position. Place the glass table top (I) in the table rim. Your table is now ready for use.
IMPORTANT: To avoid damage to your table:
● In storing patio furniture, do not stack anything on glass, stone or marble table tops.
● Before storing, drain all water that may have accumulated in or around the frames.
CARLISLE TABLE
SKU # 272-5098
Step 1:
Place the table top (A) upside down on a flat, soft surface. Attach the table legs (B) to the table top (A) using the eight bolts
(D) and metal washers (F). DO NOT TIGHTEN COMPLETELY.
Step 2:
Attach the leg connector bracket (C) to each table leg (B) using the eight bolts (E) and metal washers (F). Tighten all the bolts
with the allen wrench (H). Important Note: Each bolt should be tightened a few revolutions at a time, alternating between bolts
in a cross corner (X) pattern to ensure your table is level. Cover all the bolts with the plastic bolt caps (G).
● If not drained properly, water can cause freeze damage.
● Cover furniture with outdoor furniture covers when not in use.