Assembly Instructions

1. Place the lava rocks (B) into the fire pit body (A). Approx 1.1 lbs of lava rocks are needed (See Figure 5) .

NOTE: DO NOT completely cover the burner element or block the the surface of burner assembly with the

lava rocks. During first use, preheat the lava rocks for 15 minutes to burn out the impurities and air in the

natural lava rocks to prevent from popping out.

WARNING

Keep children away during assembly, as this item contains lava rocks, which are small

pieces and can be swallowed by children.

Figure 5

Figure 6

OPERATING INSTRUCTIONS

WARNING:

Before using this outdoor firepit, make sure you have read, understand and are following

all information provided in the “Safety Information” section beginning on page 2 and 3.

Failure to follow those instructions can cause death, serious injury or property damage.

1. Make sure the valve connections are securely fastened to the burner and the cylinder.

2. Visually check the connection between the burner/venturi tube and orifice.

3. Make sure the burner/venturi tube fits over the orifice.

4. Please refer to diagram for proper installation (See Figure 6).

5. If the burner/venturi tube does not rest flush to the orifice as shown, please contact us for assistance.

Checking for leaks

Burner connections

pilot box