Assembly Instructions
4
Figure 2
PACKAGE
CONTENTS
ASSEMBLY
INSTRUCTIONS
1.
Carefully
unpack
all
parts
from
the
box,
compare
parts
with
package
content
listed
above,
make
sure
all
parts
are
present
before
beginning
assembly
of
product.
If any
part
is
missing
or
damaged,
do
not
attempt
to
assemble
the
product.
Contact customer
service
for
replacement
parts.
2. Put
the
Lava
rock
(C)
around
the
burner,
then
remove
the label
from
the
pilot
box
(see
Figure
2). A
gas
fire
pit
requires
13.2
lbs
lava
rocks.
WARNING: keep
children
away
during
assembly,
as
this
item
contains
lava
rock,
which
are
small
pieces
and
can
be
swallowed
by
children.
NOTE: leave
the
pilot
box
uncovered
by
the
lava
rock.
B
A
C
D
E
F
PART DESCRIPTION QUANTITY
A 1 pc
B Door 1 pc
C Lid
2 box
E
1 pc
1 pc
1 pc
D Weather cover
F
pilot box.
3.
F Lava rock (13.2 Ibs)
Place the gas cylinder into the cylinder holder.
black handle
counterclockwise to remove.
The knob on the control panel is turned
all the way
to the
“OFF”
position when the fire pit is NOT in use.
Secure the cylinder by tightening clockwise
fall down.
Connect the regulator, screw the black handle (see Figure 4) clockwise to tighten, turn the
Fire table
Natural gas orifice
the butterfly
screw found on the cylinder holder (see Figure 3), so that the cylinder cannot move from side to side or