Assembly Instructions

E
RECTANGULAR
STEEL PLATE
2
F
PLASTIC BOLT
CAP
4
G
PLASTIC NUT
CAP
4
H
HEX WRENCH 2
Step 2:
Remove the protective plastic cap on the swivel assembly before inserting into the chair base (CC). Insert the shaft of the
swivel assembly directly into the plastic bushing of the chair base. Make sure you have inserted it all the way and that the base
is locked onto the shaft. If you experience difficulty, insert the shaft into the bushing using a twisting motion as you insert. Now
the chair is ready for use. If you need further assistance, please contact our Customer Service Center (Monday-Friday
8:30 a.m.- 4:30 p.m. CST) at 1-800-426-2950 or e-mail: [e-mail].
IMPORTANT:
● Before storing, drain all water that may have accumulated in or around the frames.
● If not drained properly, water can cause freeze damage.
● Cover furniture with outdoor furniture covers when not in use.