Instructions / Assembly

TOP

BOTTOM

TIP:

PREBENDING THE ENDS WILL EASE ASSEMBLY.

PLACING THE SLIDE BED OUT IN THE SUN MAKES

IT EASIER TO BEND.

NOTE:TAKE NOTE OF SLIDE BED SURFACE FINISH, THE DULL SIDE WILL BE TOWARDS THE GROUND.

PLACE SLIDE BRACE CENTERED ON THE BOTTOM (DULL SIDE) AND 1/2" FROM THE EDGE. USE M77

BOARD AS A TEMPLATE FOR DRILLING BOTTOM HOLE PATTERN IN SLIDE BED. USE A 5/16" DRILL BIT.

SLIDE BED 8' YELLOW

(x1)

A100056

SLIDE BRACE - W100544

5/8"x3 3/8"x17 1/4" (16x86x438)

M77

(x1)

115

(x3)

BOLT - 1/2"

074

(x3)

T-NUT - 5/16"

M77

(x1)

SLIDE BRACE

056

(x1)

SLIDE BED 8' YELLOW

STEP 1 - SLIDE ASSEMBLY

QTY

PART

NUMBER

DESCRIPTION

3 H100074

T-NUT 5/16

3 H100115

BOLT WH 5/16x1/2

TIP:

INSTALL T-NUTS INTO BOARDS

BEFORE ASSEMBLY