Instructions / Assembly

TIP:

A HELPER IS REQUIRED FOR THIS

PHASE.

FAILURE TO INSERT SLIDE BED PROPERLY MAY RESULT IN

INJURY OR AMPUTATION. EXPOSED SLIDE EDGES CAN BE SHARP AND BECOME

A LACERATION HAZARD IF THE SLIDE IS NOT PROPERLY ASSEMBLED.

SLIDE RAIL 8' GREEN RIGHT

(x1)

A100054

CENTER SLIDE BRACE - W100545

5/8"x3 3/8"x17 1/4" (16x86x438)

M78

(x2)

SLIDE RAIL 8' GREEN LEFT

(x1)

A100055

NOTE:

USING A 1/8" DRILL BIT, DRILL PILOT HOLES IN EACH INDENTATION ALONG EACH SIDE RAIL. THERE SHOULD

BE 12 INDENTIONS ON EACH RAIL.

PLACE THE SLIDE RAIL ON FLAT SURFACE. STARTING AT THE BOTTOM, INSERT THE SLIDE BED INTO THE

CHANNEL ON THE INSIDE OF THE RAIL. HOLD THE SLIDE BED IN PLACE WHILE A HELPER BENDS THE SLIDE

BED INO THE CHANNEL. MAKE SURE THE SLIDE BED IS COMPLETELY INSERTED INTO THE CHANNEL.

INSERT THE TWO CENTER SLIDE BRACES INTO THEIR RESPECTIVE LOCATIONS. SECURE THE SLIDE BED

AND CENTER USING THE PROVIDED HARDWARE.

REPEAT THIS PROCESS FOR THE OPPOSITE SLIDE RAIL.

054

(x1)

SLIDE RAIL 8' GREEN RIGHT

M78

(x2)

CENTER SLIDE BRACE

055

(x1)

SLIDE RAIL 8' GREEN LEFT

090

(x24)

SCREW - 2 1/2"

STEP 2 - SLIDE ASSEMBLY

QTY

PART

NUMBER

DESCRIPTION

24 H100090 SCREW PFH 8x2 1/2