Canyon Creek Wooden Swing Set Owner’s Manual & Assembly Instructions Model # 1803022 average 2 person assembly time Before you begin MEDIA TER FOR QUICK & EASY ASSEMBLY HOURS DOWNLOAD THE FREE APP TE 10 IN MANUFACTURED BY: Backyard Discovery 3305 Airport Drive Pittsburg, KS 66762 800-856-4445 assembly time may vary based on skill level FIND 3D INSTRUCTIONS FOR THIS PRODUCT IN For the most up to date assembly manual, to register your set, or to order replacement parts please visit www.
INSTALLATION SERVICES AVAILABLE!* Need a helping hand? Let our team of professionals handle the installation for you! *Installation services are only available to U.S. customers. With Go Con! gure, we bring you 18 years of experience right to your doorstep. We service a wide array of indoor and outdoor recreation products that most consumers don’t have the time or ability to deliver & install themselves.
Owner’s Manual Please Read This Before Starting Assembly MISSING A PART? CALL US BEFORE GOING BACK TO THE STORE The store where you made your purchase does not stock parts for this item. If you have assembly questions or you are missing or have damaged parts, please call 1-800-856-4445 or visit www.backyarddiscovery.
Owner’s Manual Limited Warranty Please read entire booklet completely before beginning the assembly process Please retain these instructions and your receipt for future reference. Keep them in a safe place where you can refer to them as needed. In order to provide you with the most efficient service, it is required that you provide us with the part numbers when ordering parts. For Your Records: Please take time and fill out the information below. This information will be needed for warranty issues.
Owner’s Manual Operating Instructions and Safety Warnings WARNING: BURN HAZARD • Pay special attention to plastic and metal surfaces as they may be hot enough to cause burns. • Always check the temperature of the product before letting your children play on it. • Remember that the product may cause burns if left in direct sunlight. • Always be aware of the sun and weather conditions, and do not assume that the equipment is safe because the air temperature is not very high.
Owner’s Manual Please Read This Before Starting Assembly Positioning Your Playcenter Suggested Playground Surfacing • The playcenter is designed to be installed on a level surface by an adult with an adult helper. Place in a flat area of your yard to minimize ground preparation. • Do not install home playground equipment over concrete, asphalt, packed earth, grass, carpet, or any other hard surface. A fall onto a hard surface can result in serious injury to the equipment user.
Owner’s Manual Please Read This Before Starting Assembly APPENDIX A X3.1.3.2 Do not install loose-fill surfacing over hard surfaces such as concrete or asphalt. X3.1.4 Poured-In-Place Surfaces or Pre-Manufactured Rubber Tiles — You may be interested in using surfacing other than loose-fill materials – like rubber tiles or poured-in-place surfaces. X3.1.4.1 Installations of these surfaces generally require a professional and are not “do-it-yourself ” projects. X3.1.4.
Owner’s Manual Instructions for Proper Maintenance IT IS IMPORTANT TO CHECK AND TIGHTEN ALL HARDWARE AT THE BEGINNING AND DURING THE SEASON AS THEY MAY LOOSEN DUE TO WOOD EXPANSION AND CONTRACTION. At the beginning of each play season Additional Maintenance • • • • • • • • • Tighten all hardware. Lubricate all metallic moving parts per manufacturer’s instructions. Check all protective coverings on bolts, pipes, edges, and corners. Replace if they are loose, cracked, or missing.
Owner’s Manual Instructions for Proper Maintenance Your Backyard Discovery structure is designed and constructed of quality materials. As with all outdoor products it will weather and wear. To maximize the enjoyment, safety and life of your structure it is important that you properly maintain it. About Our Wood Backyard Discovery uses 100% Cedar (C. Lanceolata) wood.
Owner’s Manual Assembly Tips Protrusion Hazard Incorrect Correct If you see exposed threads and your bolt protrudes beyond the T-Nut you may have over tightened the bolt or used incorrect hardware. If you’ve overtightened, remove the bolt and add washers to eliminate the protrusion. 1/8” Proper Hardware Assembly Bolt and T-Nut Assembly Tap T-nut into the provided hole. Insert your bolt through the lock washer and insert into the provided hole opposite from the T-Nut.
Owner’s Manual Assembly Tips ASSEMBLY TIP: Keep an eye out for these boxes which will contain helpful pictures and information making the assembly process as quick and painless as possible. Sorting Wood E1 E2 F1 F2 G1 G2 When removing the wood from the boxes we recommend arranging them by part number before you begin assembly. This will allow for faster assembly and easily identify any parts that may be missing or damaged.
Owner’s Manual Tools Required for Installation (These are the tools that are generally required for assembly of our outdoor products. These tools are not included with the outdoor product purchase.
Basic Setup Dimensions Place the set on level ground, not less than 6 ft [2 m] from any structure or obstruction such as a fence, garage, house, overhanging branches, laundry lines, or electrical wires. 27'-7 5/8" General Information: Your set has been designed and engineered for children only and for residential use only. A maximum of 150 lbs. per child is recommended for play activities designed for individual use. A maximum of 120 lbs.
Parts Identification Wood Components (NOT TO SCALE) (1) A74 - HEAVY DUTY SWING BEAM EXT.
Parts Identification Wood Components (NOT TO SCALE) (2) (1) E72 - LEFT RAIL - W4L11168 1 3/8"x3 3/8"x54 7/8" (36x86x1395) (1) E73 - RIGHT RAIL - W4L11169 1 3/8"x3 3/8"x54 7/8" (36x86x1395) E77 - ANGLE BRACE - W4L11648 1 3/8"x3 3/8"x73 1/8" (36x86x1859) E79 - END SUPPORT - W4L11650 1 1/2"x3 1/2"x42" (36x86x1072) (1) (1) F1 - RIGHT BALCONY UPRIGHT - W4L11130 1 3/8"x2 3/8"x31 3/4" (36x60x805) (1) F2 - LEFT BALCONY UPRIGHT - W4L11131 1 3/8"x2 3/8"x31 3/4" (36x60x805) (1) (1) H2 - TABLE SUPPORT -
Parts Identification Wood Components (NOT TO SCALE) (1) H77 - LEFT UPRIGHT - W4L11173 1"x3 3/8"x58" (24x86x1474) H78 - RIGHT UPRIGHT - W4L11174 1"x3 3/8"x58" (24x86x1474) (1) (1) J1 - PORCH GROUND BOARD - W4L11128 1"x2 3/8"x40 1/2" (24x60x1030) (1) J2 - PORCH GROUND BOARD - W4L11129 1"x2 3/8"x40 5/8" (24x60x1032) J3 - BENCH SUPPORT - W4L11150 1"x2 3/8"x9" (24x60x230) (2) (2) J4 - ANGLE BRACE - W4L11151 1"x2 3/8"x10" (24x60x254) (2) J5 - SUPPORT BLOCK - W4L11152 1"x2 3/8"x2 7/8" (24x60x72) (2)
Parts Identification Wood Components (NOT TO SCALE) (1) K1 - GROUND BOARD - W4L11113 5/8"x5 1/4"x41 7/8" (16x134x1064) (1) K2 - GROUND BOARD - W4L11114 5/8"x5 1/4"x41 7/8" (16x134x1064) (1) K3 - GROUND BOARD - W4L11115 5/8"x5 1/4"x40 1/2" (16x134x1030) (1) K4 - GROUND BOARD - W4L11116 5/8"x5 1/4"x40 1/2" (16x134x1030) (1) K5 - RIGHT CENTER WALL RAIL - W4L11120 5/8"x5 1/4"x62 3/4" (16x134x1593) (1) K6 - FRONT CENTER WALL RAIL - W4L11121 5/8"x5 1/4"x61 3/8" (16x134x1560) (1) K7 - REAR CENTER WAL
Parts Identification Wood Components (NOT TO SCALE) K9 - LEFT BALCONY WALL RAIL - W4L11124 5/8"x5 1/4"x20 3/4" (16x134x528) (1) (1) K10 - FRONT BALCONY WALL RAIL - W4L11125 5/8"x5 1/4"x40 5/8" (16x134x1032) (1) K11 - LEFT SIDE WALL BOARD - W4L11132 5/8"x5 1/4"x41 7/8" (16x134x1064) (1) K12 - ARCHED WALL RAIL - W4L11143 5/8"x5 1/4"x40 5/8" (16x134x1032) (1) K13 - ARCHED WALL RAIL - W4L11144 5/8"x5 1/4"x40 5/8" (16x134x1032) (1) K14 - ANGLED WALL RAIL - W4L11145 5/8"x5 1/4"x45 3/4" (16x134x1162)
Parts Identification Wood Components (NOT TO SCALE) L1 - ARCHED WALL RAIL - W4L11138 5/8"x4 3/8"x40 5/8" (16x112x1032) (1) (1) (1) L2 - WALL RAIL - W4L11139 5/8"x4 3/8"x23 1/4" (16x112x590) (1) L3 - WALL RAIL - W4L11140 5/8"x4 3/8"x20 7/8" (16x112x529) L4 - ARCHED WALL RAIL - W4L11141 5/8"x4 3/8"x43 3/8" (16x112x1103) (2) L5 - GROUND BOARD - W4L11652 5/8"x4 3/8"x24 1/8" (16x112x612) (1) M1 - WALL RAIL - W4L11154 5/8"x3 3/8"x40 1/2" (16x86x1030) (2) M2 - BENCH BOARD - W4L07591 5/8"x3 3/8"x23" (
Parts Identification Wood Components (NOT TO SCALE) (1) M8 - FLOOR BOARD - W4L07607 5/8"x3 3/8"x20 1/8" (16x86x512) (10) M9 - FLOOR BOARD - W4L07608 5/8"x3 3/8"x20 1/8" (16x86x512) (1) M10 - FLOOR BOARD - W4L07609 5/8"x3 3/8"x40 5/8" (16x86x1031) (15) M11 - FLOOR BOARD - W4L07610 5/8"x3 3/8"x40 5/8" (16x86x1031) (2) M12 - FLOOR BOARD - W4L07611 5/8"x3 3/8"x40 5/8" (16x86x1031) (1) M13 - FLOOR BOARD - W4L07671 5/8"x3 3/8"x20 1/8" (16x86x512) (1) M73 - REAR SUPPORT - W4L07619 5/8"x3 3/8"x18 1/4"
Parts Identification Wood Components (NOT TO SCALE) M102 - ATTACHMENT BOARD - W4L11167 5/8"x3 3/8"x26 1/4" (16x86x667) (1) (1) M108 - TOP BOARD - W4L11170 5/8"x3 3/8"x26 1/4" (16x86x667) (1) M110 - ATTACHMENT BOARD - W4L11172 5/8"x3 3/8"x18 1/4" (16x86x465) (2) N1 - PORCH GROUND BOARD - W4L11127 5/8"x2 3/8"x21 1/8" (16x60x537) (18) N2 - PICKET - W4L07612 5/8"x2 3/8"x24 3/4" (16x60x628) (2) (1) N3 - BENCH BOARD - W4L07592 5/8"x2 3/8"x23" (16x60x583) O70 - SLIDE MOUNTING BOARD - W4L09040 5/8"x1
Parts Identification Wood Components (NOT TO SCALE) (1) WP1 - FRONT WALL PANEL - W2A02082 1"x20 3/8"x37 3/4" (24x517x958) (2) WP2 - RIGHT LOWER WALL PANEL - W2A02083 1"x16 7/8"x46 1/2" (24x430x1181) (1) WP3 - TOP RIGHT FRONT WALL PANEL - W2A02497 1"x16 7/8"x24 5/8" (24x430x627) (1) WP4 - TOP RIGHT FRONT WALL PANEL - W2A02498 1"x16 7/8"x24 5/8" (24x430x627) (1) WP5 - TOP LEFT REAR WALL PANEL - W2A02086 1"x16 7/8"x46 1/2" (24x430x971) (1) WP6 - TOP REAR WALL PANEL - W2A02087 1"x18 7/8"x11 3/4" (24x479x3
Parts Identification Wood Components (NOT TO SCALE) (1) WP7 - TOP FRONT WALL PANEL - W2A02088 (2) WP8 - TOP LEFT WALL PANEL - W2A02089 1"x16 7/8"x38 1/4" (24x476x971) 1"x11 3/4"x38 1/4" (24x214x971) (2) WP10 - BENCH BACK ASSEMBLY - W2A02081 1 1/8"x11 7/8"x17 5/8" (27x303x615) (2) GP1 - GABLE PANEL - W2A02091 1 1/8"x53 1/2"x16 3/8" (27x1359x414) (2) WP9 - LOWER WALL PANEL - W2A02090 1"x18 7/8"x46 1/4" (24x479x1176) 21
Parts Identification Wood Components (NOT TO SCALE) (2) RP1 - BOTTOM ROOF PANEL - W2A02494 1 3/8"x48"x19 3/8" (35x1220x491) (2) RP2 - TOP ROOF PANEL - W2A02495 1 3/8"x48"x19 1/8" (35x1220x486) (1) - CHALKBOARD - A4M00906 22
Parts Identification Hardware (1) - BOLT WH 5/16X6 BLK - H100363 (86) - SCREW PFH 8x1-1/8" - H100088 (7) - SCREW PFH 8x1-1/4" - H100087 (6) - BOLT WH 5/16x3 BLK - H100416 (249) - SCREW PFH 8x1-1/2" - H100086 (13) - SCREW PFH 8x1-3/4" - H100089 (3) - BOLT WH 5/16x2-3/4 BLK - H100195 (13) - BOLT WH 5/16x2-1/4 BLK - H100205 (71) - SCREW PFH 8x1 1/4 BLK - H100387 (17) - SCREW PFH 8x1-1/2 BLK - H100200 (4) - SCREW PFH 8x1 3/4 BLK - H100382 (48) - BOLT WH 5/16x2 BLK - H100457 (24) - SCREW PFH 8x2 BLK
Parts Identification Hardware (4) (3) - LAG SCREW WH 1/4x1-1/2 BLK - H100403 - BOLT WH 5/16x1 1/2 - H100010 (2) - LAG SCREW WH 1/4x2 BLK - H100487 (1) - BOLT WH 1/4x1/2 BLK - H100401 (26) - BOLT PTH 1/4x3/4 - H100063 (2) - BOLT WH 1/4x5/8 BLK - H100486 (15) - NUT BARREL WH 5/16x5/8 BLK - H100469 (2) - BOLT WH 1/4x1-1/4 - H100142 (20) - NUT BARREL WH 5/16x7/8 BLK - H100192 (1) - NUT BARREL WH 1/4x7/8 BLK - H100399 (43) - LAG SCREW WH 5/16x1 1/2 BLK - H100471 (2) - BOLT HEX 5/16x4 1/4 BLK - H100476
Parts Identification Hardware (7) - WASHER LOCK EXT 6x15 BLK - H100405 (2) - NUT LOCK 5/16 BLK - H100479 (137) - WASHER LOCK EXT 8x19 BLK - H100198 (29) - WASHER LOCK EXT 12x19 BLK - H100199 (1) - WASHER FLAT 8x27 - H100105 (26) - WASHER LOCK INT 8x15 - H100108 (13) - WASHER FLAT 11x25 - H100102 (13) - WASHER LOCK INT 10x18 - H100107 (9) - WASHER FLAT 8x27 BLK - H100478 (9) - WASHER LOCK EXT 6x15 - H100138 (4) - WASHER SPLIT 5/16 BLK - H100477 (3) 25 - WASHER LOCK EXT 8x19 - H100030
Parts Identification Hardware (13) - BOLT HEX 3/8x5-1/2 - H100654 (2) - T-30 TORX WRENCH - H100114 (2) - T-30 TORX BIT - H100147 (2) - T-40 TORX BIT - A100042 (2) - T-40 TORX WRENCH - A100041 26
Parts Identification Accessories (NOT TO SCALE) (2) SY - PLASTIC SUNBURST - A100322 (1) HC - BYD ID TAG (LARGE) WITHOUT AGES - A100242 (1) QU - SLIDE VF 10 FT - A100287 (6) BY - SWING HANGER QUICK LINK - A4M00505-3 (6) - GROUND STAKE REBAR - A4M00527 (4) EZ - CHAIN GREEN 51.
Parts Identification Accessories (NOT TO SCALE) (1) - "A" REVISION TAG - A100314 (4) DQ - HAND GRIP GREEN PLASTIC - A100028 (4) FA - QUICK LINK - A100069 (2) - 90° L-BRACKET - BLK - A4M00555 (1) LP - STEERING WHEEL - A100105 (2) - L BRACKET 66x66x127 - BLK - A4M00619 (1) - SWING BEAM EXTENSION BRACKET-LEFT - A4M00617 (1) - SWING BEAM EXTENSION BRACKET-RIGHT - A4M00618 (2) - L BRACKET BLACK 32x51 - A4M00710 (2) - L BRACKET 51x32x82x3.
Parts Identification Accessories (NOT TO SCALE) (3) - GREEN HC ROCK #1 - A6P00036 (1) - FAUCET KIT - A6P00024 (3) - RED HC ROCK #1 - A6P00038 (1) - SURFACE MOUNT BASIN - A6P00032 (3) - BLUE HC ROCK #2 - A6P00040 (3) - YELLOW HC ROCK #1 - A6P00042 (1) LN - Telescope - A6P00096 (1) GRILL FOOD SET - 141154 29
Parts Identification Accessories (NOT TO SCALE) (1) GRILL - A6P00282 (1) - CLIMBING ROPE - A6P00260 (1) - 21" WEB SWING SEAT - A6P00285 (2) - SWING SEAT GREEN 22IN - A6P00054 30
(1) H77 - LEFT UPRIGHT - W4L11173 1"x3 3/8"x58" (24x86x1474) (4) H76 - LADDER RUNG - W4L07620 1"x3 3/8"x17 1/4" (24x86x437) 4 FT LADDER WITH ATTACHMENT BOARD STEP 1 (8) SCREW PFH 8x2 BLK SCREW PFH 8x2 BLK (8 PLCS) H77 H76 31
(1) H78 - RIGHT UPRIGHT - W4L11174 1"x3 3/8"x58" (24x86x1474) STEP 2 (8) SCREW PFH 8x2 BLK (8 PLCS) 32 H78 SCREW PFH 8x2 BLK
(1) M110 - ATTACHMENT BOARD - W4L11172 5/8"x3 3/8"x18 1/4" (16x86x465) (1) M73 - REAR SUPPORT - W4L07619 5/8"x3 3/8"x18 1/4" (16x86x465) STEP 3 (8) SCREW PFH 8x1-1/2" (8 PLCS) M110 M73 33 SCREW PFH 8x1-1/2"
(1) E72 - LEFT RAIL - W4L11168 1 3/8"x3 3/8"x54 7/8" (36x86x1395) (1) M77 - ROCK WALL BOARD - W4L11171 5/8"x3 3/8"x25" (16x86x635) (1) E73 - RIGHT RAIL - W4L11169 1 3/8"x3 3/8"x54 7/8" (36x86x1395) (4) M75 - ROCK WALL BOARD - W4L07627 5/8"x3 3/8"x25" (16x86x635) M108 - TOP BOARD - W4L11170 5/8"x3 3/8"x26 1/4" (16x86x667) (4) M76 - ROCK WALL BOARD - W4L07626 5/8"x3 3/8"x25" (16x86x635) (1) (7) M74 - ROCK WALL BOARD - W4L07624 5/8"x3 3/8"x25" (16x86x635) ROCKWALL STEP 1 (64) SCREW PFH 8x1-1/2"
(1) M102 - ATTACHMENT BOARD - W4L11167 5/8"x3 3/8"x26 1/4" (16x86x667) ROCKWALL STEP 2 (4) SCREW PFH 8x1-1/2 BLK (4 PLCS) M102 35 SCREW PFH 8x1-1/2 BLK
(3) - GREEN HC ROCK #1 - A6P00036 (3) (3) - BLUE HC ROCK #2 - A6P00040 (3) - RED HC ROCK #1 - A6P00038 - YELLOW HC ROCK #1 - A6P00042 ROCKWALL STEP 3 (24) WASHER LOCK INT 8x15 (24) (24) BOLT PTH 1/4x3/4 (24 PLCS) WASHER LOCK INT 8x15 (24 PLCS) T-NUT 1/4 (24 PLCS) 36 BOLT PTH 1/4x3/4 T-NUT 1/4
(1) (1) A74 - HEAVY DUTY SWING BEAM EXT.
(1) E79 - END SUPPORT - W4L11650 1 1/2"x3 1/2"x42" (36x86x1072) (1) (1) G80 - GROUND BOARD - W4L11649 1"x5 1/4"x87 3/8" (24x134x2218) SP1 - SWING BEAM SUPPORT - W4L11651 3 3/8"x3 3/8"x49 5/8" (86x86x1260) (2) E77 - ANGLE BRACE - W4L11648 1 3/8"x3 3/8"x73 1/8" (36x86x1859) SWING BEAM ASSEMBLY STEP 2 BOLT WH 5/16X6 BLK (1) SP1 (2) NUT BARREL WH 5/16x7/8 BLK (1 PLC) BOLT WH 5/16x2-1/4 BLK (4) BOLT WH 5/16x2 BLK WASHER LOCK EXT 12x19 BLK (1 PLC) (7) WASHER LOCK EXT 8x19 BLK (1 PLC) NUT BARREL W
SWING BEAM ASSEMBLY STEP 3 (2) (2) NUT BARREL WH 5/16x7/8 BLK (2 PLCS) BOLT WH 5/16x3 BLK (2 PLCS) 39 BOLT WH 5/16x3 BLK NUT BARREL WH 5/16x7/8 BLK
(6) BY - SWING HANGER QUICK LINK - A4M00505-3 SWING BEAM ASSEMBLY STEP 4 (12) T-NUT 3/8 T-NUT 3/8 (12 PLCS) SWING HANGER (6 PLCS) WASHER FLAT 11x25 (12 PLCS) WASHER LOCK INT 10x18 (12 PLCS) BOLT HEX 3/8x5-1/2 (12 PLCS) 40 (12) BOLT HEX 3/8x5-1/2 (12) WASHER FLAT 11x25 (12) WASHER LOCK INT 10x18
(1) E7 - RIGHT REAR UPRIGHT - W4L11134 1 3/8"x3 3/8"x43 1/2" (36x86x1104) (1) (1) K12 - ARCHED WALL RAIL - W4L11143 5/8"x5 1/4"x40 5/8" (16x134x1032) (1) STEP 1 E9 - RIGHT FRONT UPRIGHT - W4L11136 1 3/8"x3 3/8"x43 1/2" (36x86x1104) G1 - SWING BEAM MOUNT - W4L11137 1"x5 1/4"x62 1/8" (24x134x1577) NOTE: PAY CLOSE ATTN TO ALL BOARD FEATURES & HOLES FOR CORRECT PLACEMENT & ORIENTATION ON ALL STEPS.
(1) E1 - RIGHT REAR UPRIGHT - W2A02496 1 3/8"x3 3/8"x51 3/4" (36x86x1314) (1) (1) K1 - GROUND BOARD - W4L11113 5/8"x5 1/4"x41 7/8" (16x134x1064) E4 - RIGHT FRONT UPRIGHT - W4L11119 1 3/8"x3 3/8"x51 3/4" (36x86x1314) (1) (1) SQ - "A" REVISION TAG - A100314 K5 - RIGHT CENTER WALL RAIL - W4L11120 5/8"x5 1/4"x62 3/4" (16x134x1593) STEP 2 (2) SCREW PWH 8x5/8 (6) BOLT WH 5/16x2 BLK BOLT WH 5/16x2 BLK (6 PLCS) (6) WASHER LOCK EXT 8x19 BLK (6 PLCS) T-NUT 5/16 BLK (6) WASHER LOCK EXT 8x19 BLK NOTE HOL
43
(1) E2 - LEFT REAR UPRIGHT - W4L11117 1 3/8"x3 3/8"x51 3/4" (36x86x1314) (1) (1) E3 - LEFT FRONT UPRIGHT - W4L11118 1 3/8"x3 3/8"x51 3/4" (36x86x1314) (1) (1) (1) K2 - GROUND BOARD - W4L11114 5/8"x5 1/4"x41 7/8" (16x134x1064) K8 - LEFT CENTER WALL RAIL - W4L11123 5/8"x5 1/4"x40 5/8" (16x134x1032) E6 - LEFT REAR UPRIGHT - W4L11133 1 3/8"x3 3/8"x43 1/2" (36x86x1104) (1) E8 - LEFT FRONT UPRIGHT - W4L11135 1 3/8"x3 3/8"x43 1/2" (36x86x1104) K13 - ARCHED WALL RAIL - W4L11144 5/8"x5 1/4"x40 5/8" (16x13
J1 - PORCH GROUND BOARD - W4L11128 1"x2 3/8"x40 1/2" (24x60x1030) (1) K15 - ANGLED WALL RAIL - W4L11146 5/8"x5 1/4"x45 3/4" (16x134x1162) M1 - WALL RAIL - W4L11154 5/8"x3 3/8"x40 1/2" (16x86x1030) (1) K4 - GROUND BOARD - W4L11116 5/8"x5 1/4"x40 1/2" (16x134x1030) (1) K6 - FRONT CENTER WALL RAIL - W4L11121 5/8"x5 1/4"x61 3/8" (16x134x1560) (1) - L BRACKET BLACK 32x51 - A4M00710 12 10 13 11 14 12 15 13 STEP 5 11 9 LAG SCREW WH 5/16x1 1/2 BLK (4 PLCS) LAG SCREW 2 3 1 4 2 5 3 6 4 7 5 8 6
K14 - ANGLED WALL RAIL - W4L11145 5/8"x5 1/4"x45 3/4" (16x134x1162) (1) K3 - GROUND BOARD - W4L11115 5/8"x5 1/4"x40 1/2" (16x134x1030) (1) K7 - REAR CENTER WALL RAIL - W4L11122 5/8"x5 1/4"x61 3/8" (16x134x1560) 11 9 12 10 13 11 14 12 15 13 STEP 6 LAG SCREW 4 2 5 3 6 4 7 5 8 6 9 7 10 8 ! 3 1 2 21 20 19 17 18 11 12 13 14 15 16 2 3 4 5 6 7 8 9 10 1 1 BLK 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 NOTE HOLES (12) WH 5/16x1 1/2
(1) L2 - WALL RAIL - W4L11139 5/8"x4 3/8"x23 1/4" (16x112x590) (1) - L BRACKET BLACK 32x51 - A4M00710 (1) L4 - ARCHED WALL RAIL - W4L11141 5/8"x4 3/8"x43 3/8" (16x112x1103) STEP 7 L BRACKET BLACK 32x51 (1 PLC) (3) LAG SCREW WH 5/16x1 1/2 BLK (3) WASHER LOCK EXT 8x19 BLK 1 1/4 (1) LAG SCREW WH 5/16x2 BLK LAG SCREW WH 5/16x2 BLK (1 PLC) WASHER LOCK EXT 8x19 BLK (3 PLCS) LAG SCREW WH 5/16x1 1/2 BLK (3 PLCS) L2 L4 22" 47
(1) (1) Q1 - ARCHED WALL RAIL - W4L11142 1"x4 3/8"x40 5/8" (24x112x1032) K11 - LEFT SIDE WALL BOARD - W4L11132 5/8"x5 1/4"x41 7/8" (16x134x1064) (1) F1 - RIGHT BALCONY UPRIGHT - W4L11130 1 3/8"x2 3/8"x31 3/4" (36x60x805) (1) F2 - LEFT BALCONY UPRIGHT - W4L11131 1 3/8"x2 3/8"x31 3/4" (36x60x805) STEP 8 LAG SCREW WH 5/16x1 1/2 BLK (8 PLCS) T-NUT 5/16 BLK (8 PLCS) (8) (4) BOLT WH 5/16x2 BLK (4) BOLT WH 5/16x2-1/4 BLK T-NUT 5/16 BLK (8) WASHER LOCK EXT 8x19 BLK (16 PLCS) BOLT WH 5/16x2-1/4 BLK (
(2) H4 - DECK BRACE - W4L11156 1"x3 3/8"x12 3/4" (24x86x325) STEP 9 (2) LAG SCREW WH 1/4x1-1/2 BLK (2) WASHER LOCK EXT 6x15 BLK (2) (2) (2) BOLT WH 5/16x1 1/2 BLK WASHER LOCK EXT 8x19 BLK T-NUT 5/16 BLK H4 H4 T-NUT 5/16 BLK (2 PLCS) WASHER LOCK EXT 8x19 BLK (2 PLCS) WASHER LOCK EXT 6x15 BLK (2 PLCS) LAG SCREW WH 1/4x1-1/2 BLK (2 PLCS) BOLT WH 5/16x1 1/2 BLK (2 PLCS) 49
(1) K9 - LEFT BALCONY WALL RAIL - W4L11124 5/8"x5 1/4"x20 3/4" (16x134x528) (1) L3 - WALL RAIL - W4L11140 5/8"x4 3/8"x20 7/8" (16x112x529) (2) N1 - PORCH GROUND BOARD - W4L11127 5/8"x2 3/8"x21 1/8" (16x60x537) STEP 10 NUT BARREL WH 5/16x5/8 BLK (2 PLCS) (4) SCREW PFH 8x1-1/2 BLK (2) BOLT WH 5/16x1/2 BLK (2) WASHER LOCK EXT 12x19 BLK (2) NUT BARREL WH 5/16x5/8 BLK WASHER LOCK EXT 12x19 BLK (2 PLCS) BOLT WH 5/16x1/2 BLK (2 PLCS) NOTE HOLES ARE ABOVE CENTER OF BOARD L3 NOTE SMALL HOLE LOCATIO
(1) (1) STEP 11 E5 - RIGHT FRONT BALCONY UPRIGHT - W4L11126 1 3/8"x3 3/8"x80 3/4" (36x86x2052) E11 - RIGHT FRONT BALCONY UPRIGHT - W4L11157 1 3/8"x3 3/8"x80 3/4" (36x86x2052) •INSTALL T-NUTS INTO PARTS BEFORE ASSEMBLY OF PARTS.
(1) J2 - PORCH GROUND BOARD - W4L11129 1"x2 3/8"x40 5/8" (24x60x1032) (1) (1) L1 - ARCHED WALL RAIL - W4L11138 5/8"x4 3/8"x40 5/8" (16x112x1032) K10 - FRONT BALCONY WALL RAIL - W4L11125 5/8"x5 1/4"x40 5/8" (16x134x1032) STEP 12 L1 K10 (2) LAG SCREW WH 5/16x2 BLK (8) LAG SCREW WH 5/16x1 1/2 BLK (10) WASHER LOCK EXT 8x19 BLK WASHER LOCK EXT 8x19 BLK (8 PLCS) LAG SCREW WH 5/16x1 1/2 BLK (8 PLCS) J2 WASHER LOCK EXT 8x19 BLK (2 PLCS) LAG SCREW WH 5/16x2 BLK (2 PLCS) NOTE PILOT HOLES 52
(2) H4 - DECK BRACE - W4L11156 1"x3 3/8"x12 3/4" (24x86x325) STEP 13 (2) LAG SCREW WH 1/4x1-1/2 BLK (2) WASHER LOCK EXT 6x15 BLK (2) (2) (2) BOLT WH 5/16x1 1/2 BLK WASHER LOCK EXT 8x19 BLK T-NUT 5/16 BLK WASHER LOCK EXT 8x19 BLK (2 PLCS) T-NUT 5/16 BLK (2 PLCS) H4 LAG SCREW WH 1/4x1-1/2 BLK (2 PLCS) WASHER LOCK EXT 6x15 BLK (2 PLCS) BOLT WH 5/16x1 1/2 BLK (2 PLCS) 53 H4
T1 - SUPPORT BOARD - W4L07599 1"x1 3/8"x37 5/8" (24x34x957) (2) (1) STEP 14 J8 - FLOOR JOIST - W4L07602 1"x2 3/8"x40 1/2" (24x60x1029) INSTALL CENTER FLOOR SUPPORTS SCREW PFH 8x1 1/4 BLK (6) (4) SCREW PFH 8x2 BLK T1 J8 SCREW PFH 8x1 1/4 BLK (3 PLCS) T1 TOP VIEW NOTE PILOT HOLES SCREW PFH 8x2 BLK (2 PLCS) T1 SCREW PFH 8x1 1/4 BLK (3 PLCS) T1 J8 SIDE VIEW SUPPORT PLACEMENT SCREW PFH 8x2 BLK (2 PLCS) 5/8 1 15/16 54
(2) T3 - SUPPORT BOARD - W4L07601 1"x1 3/8"x18 3/4" (24x34x477) STEP 15 (1) 90° L-BRACKET - BLK (2 PLCS) J9 - FLOOR JOIST - W4L07603 1"x2 3/8"x20 1/4" (24x60x513) T-NUT 1/4 BLK (2 PLCS) (4) NUT BARREL WH 1/4x7/8 BLK (1 PLCS) (1) BOLT WH 1/4x5/8 BLK (2 PLCS) (2) - 90° L-BRACKET - BLK - A4M00555 SCREW PFH 8x1 1/4 BLK BOLT WH 1/4x1/2 BLK (2) (2) SCREW PFH 8x2 BLK BOLT WH 1/4x5/8 BLK K8 J9 BOLT WH 1/4x1/2 BLK (1 PLCS) SCREW PFH 8x1 1/4 BLK (2 PLCS) T3 SCREW PFH 8x2 BLK (2 PLCS) T3 TOP VIEW
(10) M11 - FLOOR BOARD - W4L07610 5/8"x3 3/8"x40 5/8" (16x86x1031) (2) M12 - FLOOR BOARD - W4L07611 5/8"x3 3/8"x40 5/8" (16x86x1031) STEP 16 (36) M12 M11 M12 SCREW PFH 8x1-1/2" (36 PLCS) NOTE PILOT HOLES 56 SCREW PFH 8x1-1/2"
(5) M11 - FLOOR BOARD - W4L07610 5/8"x3 3/8"x40 5/8" (16x86x1031) (1) M10 - FLOOR BOARD - W4L07609 5/8"x3 3/8"x40 5/8" (16x86x1031) STEP 17 (18) SCREW PFH 8x1 1/2 (18 PLCS) NOTE PILOT HOLES M11 M10 57 SCREW PFH 8x1 1/2
(1) T1 - SUPPORT BOARD - W4L07599 1"x1 3/8"x37 5/8" (24x34x957) (1) T2 - SUPPORT BOARD - W4L07600 1"x1 3/8"x37 3/4" (24x34x959) STEP 18 (3) SCREW PFH 8x1-1/2" (3) SCREW PFH 8x1-1/4 BLK NOTE PILOT HOLES T2 SCREW PFH 8x1-1/2" (3 PLCS) T1 NOTE PILOT HOLES SCREW PFH 8x1-1/4 BLK (3 PLCS) 1 15/16 SIDE VIEW SUPPORT PLACEMENT 5/8 58
(1) M8 - FLOOR BOARD - W4L07607 5/8"x3 3/8"x20 1/8" (16x86x512) (10) M9 - FLOOR BOARD - W4L07608 5/8"x3 3/8"x20 1/8" (16x86x512) (1) M13 - FLOOR BOARD - W4L07671 5/8"x3 3/8"x20 1/8" (16x86x512) STEP 19 (24) SCREW PFH 8x1 1/2 SCREW PFH 8x1 1/2 (24 PLCS) M13 NOTE PILOT HOLES M9 M8 59
(1) WP1 - FRONT WALL PANEL - W2A02082 1"x20 3/8"x37 3/4" (24x517x958) STEP 20 (7) SCREW PFH 8x1 1/4 BLK SCREW PFH 8x1 1/4 BLK (3 PLCS) WP1 NOTE PILOT HOLES SCREW PFH 8x1 1/4 BLK (4 PLCS) WP1 PANEL PLACEMENT 2 1/16 1 5/16 60
(1) T4 - SUPPORT BOARD - W4L07613 1"x1 3/8"x37 3/4" (24x34x958) STEP 21 (3) T4 SCREW PFH 8x1 1/4 BLK (3 PLCS) 61 SCREW PFH 8x1 1/4 BLK
(2) J6 - SUPPORT BLOCK - W4L11153 1"x2 3/8"x6 1/4" (24x60x160) STEP 22 (4) J6 J6 SCREW PFH 8x1 1/8 (4 PLCS) REAR VIEW NOTE PILOT HOLES 62 SCREW PFH 8x1 1/8
(1) J7 - SUPPORT BLOCK - W4L11158 1"x2 3/8"x3 3/8" (24x60x86) (1) H1 - TABLE SUPPORT - W4L11147 1"x3 3/8"x22 3/8" (24x86x567) STEP 23 BOLT WH 5/16x2-3/4 BLK (1) WASHER LOCK EXT 8x19 BLK T-NUT 5/16 BLK (1) 11 9 12 10 13 11 14 12 15 13 (1) 2 3 1 4 2 5 3 6 4 7 5 8 6 9 7 10 8 ! 21 17 18 19 20 13 14 15 16 11 12 2 3 4 5 6 7 8 9 10 1 1 22 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 T-NUT 5/16 BLK (1 PLCS) 63 20 BOLT WH 5/16x2-3/4 BLK (1 PLCS)
(1) M5 - FLOOR BOARD - W4L07598 5/8"x3 3/8"x19 1/4" (16x86x488) (8) M4 - FLOOR BOARD - W4L07597 5/8"x3 3/8"x21 1/8" (16x86x537) (2) K17 - FLOOR BOARD - W4L07596 5/8"x5 1/4"x21 1/8" (16x134x537) STEP 24 (42) SCREW PFH 8x1 1/2 (42 PLCS) K17 M4 M5 M4 K17 64 EVENLY SPACE ALL FLOOR BOARDS.
J3 - BENCH SUPPORT - W4L11150 1"x2 3/8"x9" (24x60x230) (2) J5 - SUPPORT BLOCK - W4L11152 1"x2 3/8"x2 7/8" (24x60x72) 11 9 12 10 13 11 14 12 15 13 STEP 25 J4 - ANGLE BRACE - W4L11151 1"x2 3/8"x10" (24x60x254) (2) (2) T-NUT 5/16 BLK (4) WASHER LOCK EXT 8x19 BLK (2) WASHER LOCK EXT 6x15 BLK (2) BOLT WH 5/16x1 3/4 BLK (2) LAG SCREW WH 5/16x2 BLK (2) LAG SCREW WH 1/4x2 BLK 2 3 1 4 2 5 3 6 4 7 5 8 6 9 7 10 8 ! 21 19 20 15 16 17 18 13 14 8 9 10 11 12 5 6 7 2 3 4
(2) M2 - BENCH BOARD - W4L07591 5/8"x3 3/8"x23" (16x86x583) (2) M3 - TABLE BOARD - W4L07593 5/8"x3 3/8"x23" (16x86x583) (2) N3 - BENCH BOARD - W4L07592 5/8"x2 3/8"x23" (16x60x583) STEP 26 (22) SCREW PFH 8x1 1/2 SCREW PFH 8x1 1/2 (22 PLCS) M2 N3 M3 M2 N3 M3 66
(1) (2) H2 - TABLE SUPPORT - W4L11148 1"x3 3/8"x11 5/8" (24x86x295) M3 - TABLE BOARD - W4L07593 5/8"x3 3/8"x23" (16x86x583) (1) (1) STEP 27 K16 K16 - TABLE BOARD - W4L07594 5/8"x5 1/4"x23" (16x134x583) H3 - TABLE SUPPORT - W4L11149 1"x3 3/8"x11 5/8" (24x86x295) M3 M3 SCREW PFH 8x1 1/2 (12 PLCS) H3 (2) T-NUT 5/16 BLK (2) WASHER LOCK EXT 8x19 BLK (2) H2 FLUSH BOLT WH 5/16x1 3/4 BLK (2) (12) SCREW PFH 8x1 1/8 SCREW PFH 8x1 1/2 20 3/8 ASSEMBLE TABLE TOP AS SHOWN •INSTALL T-NUTS INTO PART
(2) WP2 - RIGHT LOWER WALL PANEL - W2A02083 1"x16 7/8"x46 1/2" (24x430x1181) STEP 28 (8) SCREW PFH 8x1 1/4 BLK SCREW PFH 8x1 1/4 BLK (8 PLCS) WP2 2 3/16 3 11/16 68
(1) F3 - SUPPORT BLOCK - W4L11159 1 3/8"x2 3/8"x9 1/4" (36x60x234) (1) WP10 - BENCH BACK ASSEMBLY - W2A02081 1 1/8"x11 7/8"x17 5/8" (27x303x615) STEP 29 (4) NOTE PILOT HOLES T-NUT 5/16 BLK (1) SCREW PFH 8x1-1/2 BLK (3) REAR VIEW (4) WASHER LOCK EXT 8x19 BLK BOLT WH 5/16x2 BLK (1) BOLT WH 5/16x2-3/4 BLK F3 WP10 F3 NOTE PILOT HOLES BOLT WH 5/16x2 BLK (3 PLCS) •INSTALL T-NUTS PRIOR TO ASSEMBLY T-NUT 5/16 BLK (4 PLCS) WASHER LOCK EXT 8x19 BLK (4 PLCS) BOLT WH 5/16x2-3/4 BLK (1 PLCS) SCREW PFH
(1) WP9 - LOWER WALL PANEL - W2A02090 1"x16 7/8"x46 1/2" (24x476x1181) STEP 30 15/16 (4) WP9 3 5/8 WP9 SCREW PFH 8x1 1/4 BLK (4 PLCS) 70 SCREW PFH 8x1 1/4 BLK
(1) (1) WP10 - BENCH BACK ASSEMBLY - W2A02081 1 1/8"x11 7/8"x17 5/8" (27x303x615) F4 - SUPPORT BLOCK - W4L11160 1 3/8"x2 3/8"x9 1/4" (36x60x234) STEP 31 WP10 (1) (3) (1) F4 (4) WASHER LOCK EXT 8x19 BLK SCREW PFH 8x1-1/2 BLK BOLT WH 5/16x2 BLK BOLT WH 5/16x2-3/4 BLK (4) T-NUT 5/16 BLK NOTE PILOT HOLES •INSTALL T-NUTS PRIOR TO ASSEMBLY BOLT WH 5/16x2 BLK (3 PLCS) SCREW PFH 8x1-1/2 BLK (1 PLCS) F4 WP10 T-NUT 5/16 BLK (4 PLCS) WASHER LOCK EXT 8x19 BLK (4 PLCS) BOLT WH 5/16x2-3/4 BLK (1 PLCS) 7
(1) M6 - COUNTER TOP - W4L07605 5/8"x3 3/8"x37 5/8" (16x86x957) (2) M7 - COUNTER TOP - W4L07606 5/8"x3 3/8"x38 5/8" (16x86x981) STEP 32 (14) SCREW PFH 8x1 1/2 M6 M7 M7 M6 SCREW PFH 8x1 1/2 (14 PLCS) M7 72
(1) WP9 - LOWER WALL PANEL - W2A02090 1"x18 7/8"x46 1/4" (24x479x1176) STEP 33 (4) SCREW PFH 8x1 1/4 BLK WP9 3 15/16 WP9 SCREW PFH 8x1 1/4 BLK (4 PLCS) 73
(1) - FAUCET KIT - A6P00024 STEP 34 (1) - SURFACE MOUNT BASIN - A6P00032 SCREW PFH 8x1 1/2 (2 PLCS) SCREW PWH 8x5/8 (2 PLCS) 74 (2) SCREW PFH 8x1 1/2 (2) SCREW PWH 8x5/8
(1) GRILL - A6P00282 STEP 35 HANDLE ASSEMBLY (4) GRILL LOCATION GRILL 4 13/16 GRILL HANDLE (1 PLC) INCLUDED IN KIT SCREW PWH 8x5/8 (4 PLCS) NOTE: GRILL LIP SHOULD BE TOUCHING COUNTER TOP EDGE.
(1) WP7 - TOP FRONT WALL PANEL - W2A02088 1"x16 7/8"x38 1/4" (24x476x971) STEP 36 (4) WP7 SCREW PFH 8x1 1/4 BLK (4 PLCS) A 76 SCREW PFH 8x1 1/4 BLK
(1) WP4 - TOP RIGHT FRONT WALL PANEL - W2A02498 (1) WP3 - TOP RIGHT FRONT WALL PANEL - W2A02497 1"x16 7/8"x24 5/8" (24x430x627) 1"x16 7/8"x24 5/8" (24x430x627) STEP 37 (4) SCREW PFH 8x1 1/4 BLK (4) SCREW PFH 8x1-1/2 BLK SCREW PFH 8x1-1/2 BLK (4 PLCS) NOTE HOLES WP3 WP4 SCREW PFH 8x1 1/4 BLK (4 PLCS) 77
(2) WP8 - TOP LEFT WALL PANEL - W2A02089 1"x11 3/4"x38 1/4" (24x214x971) STEP 38 (8) SCREW PFH 8x1 1/4 BLK WP8 SCREW PFH 8x1 1/4 BLK (8 PLCS) 78
(1) WP5 - TOP LEFT REAR WALL PANEL - W2A02086 (1) WP6 - TOP REAR WALL PANEL - W2A02087 1"x16 7/8"x46 1/2" (24x430x971) 1"x18 7/8"x11 3/4" (24x479x300) STEP 39 (2) WASHER LOCK EXT 8x19 BLK (2 PLCS) T-NUT 5/16 BLK (2 PLCS) BOLT WH 5/16x1 1/2 BLK (2 PLCS) SCREW PFH 8x1 1/4 BLK (8 PLCS) WP6 WP5 NOTE HOLES 79 T-NUT 5/16 BLK (2) WASHER LOCK EXT 8x19 BLK (2) BOLT WH 5/16x1 1/2 BLK (8) SCREW PFH 8x1 1/4 BLK
(8) N2 - PICKET - W4L07612 5/8"x2 3/8"x24 3/4" (16x60x628) STEP 40 N2 63 [2 1/2 in] (3 SPCS) (32) N2 80 [3 1/8 in] N2 SCREW PFH 8x1 1/8 (32 PLCS) 80 SCREW PFH 8x1 1/8
(10) N2 - PICKET - W4L07612 5/8"x2 3/8"x24 3/4" (16x60x628) STEP 41 (40) 51 [2 in] N2 N2 60 [2 3/8 in] (3 SPCS) SCREW PFH 8x1 1/8 (40 PLCS) 81 SCREW PFH 8x1 1/8
(1) GP1 - GABLE PANEL - W2A02091 (1) SY - PLASTIC SUNBURST - A100322 1 1/8"x53 1/2"x16 3/8" (27x1359x414) STEP 42 SCREW PWH 8x5/8 (4 PLCS) (2) T-NUT 5/16 BLK (2) WASHER LOCK EXT 8x19 BLK SY GP1 BOLT WH 5/16x1 1/4 BLK (2 PLCS) WASHER LOCK EXT 8x19 BLK (2 PLCS) T-NUT 5/16 BLK (2 PLCS) 82 (2) (4) BOLT WH 5/16x1 1/4 BLK SCREW PWH 8x5/8
(1) SY - PLASTIC SUNBURST - A100322 (1) GP1 - GABLE PANEL - W2A02091 1 1/8"x53 1/2"x16 3/8" (27x1359x414) STEP 43 (2) T-NUT 5/16 BLK (2) WASHER LOCK EXT 8x19 BLK (2) BOLT WH 5/16x1 1/4 BLK (2 PLCS) WASHER LOCK EXT 8x19 BLK (2 PLCS) SCREW PWH 8x5/8 (4 PLCS) T-NUT 5/16 BLK (2 PLCS) SY GP1 83 (4) BOLT WH 5/16x1 1/4 BLK SCREW PWH 8x5/8
(2) RP2 - TOP ROOF PANEL - W2A02495 1 3/8"x48"x19 1/8" (35x1220x486) STEP 44 SCREW PWH 8x1-1/4 (8 PLCS) RP2 RP2 SCREW PFH 8x1 3/4 (4 PLCS) 84 (4) SCREW PFH 8x1 3/4 (8) SCREW PWH 8x1-1/4
(2) RP1 - BOTTOM ROOF PANEL - W2A02494 1 3/8"x48"x19 3/8" (35x1220x491) STEP 45 (8) SCREW PFH 8x1 3/4 NOTE HOLES SCREW PFH 8x1 3/4 (8 PLCS) RP1 RP1 85
(1) E10 - MOUNTING BLOCK - W4L11155 1 3/8"x3"x4 3/4" (36x76x120) (1) LP - STEERING WHEEL - A100105 STEP 46 SCREW PFH 8x1 1/4 BLK (2) SCREW PFH 8x1 1/4 BLK (2 PLCS) (1) E10 LAG SCREW WH 5/16x1 1/2 STEERING WHEEL WASHER FLAT 8x27 (1) LAG SCREW WH 5/16x1 1/2 PLASTIC CAP (INCLUDED IN KIT) NOTE HOLE LOCATION FOR PROPER ORIENTATION.
THIS HOLE FACES THE RAIL IN THIS STEP.
(4) DQ - HAND GRIP GREEN PLASTIC - A100028 STEP 48 (2) BOLT WH 1/4x1-1/4 (6) LAG SCREW WH 1/4x1-1/2 HAND GRIP GREEN PLASTIC (4 PLCS) T-NUT 1/4 (2 PLCS) WASHER LOCK EXT 6x15 (6 PLCS) WASHER LOCK EXT 6x15 (2 PLCS) BOLT WH 1/4x1-1/4 (2 PLCS) 88 LAG SCREW WH 1/4x1-1/2 (6 PLCS) (2) T-NUT 1/4 (8) WASHER LOCK EXT 6x15
(1) - CHALKBOARD - A4M00906 STEP 49 (4) SCREW PFH 8x1-1/4" (4 PLCS) CHALKBOARD NOTE HOLES IN CHALKBOARD 89 SCREW PFH 8x1-1/4"
(1) LADDER ASSEMBLY STEP 50 (2) WASHER LOCK EXT 8x19 BLK (2 PLCS) BOLT WH 5/16x1 1/4 BLK (2 PLCS) 90 WASHER LOCK EXT 8x19 BLK (2) BOLT WH 5/16x1 1/4 BLK
(2) (2) - L BRACKET 51x32x82x3.175 - A4M00855 L5 - GROUND BOARD - W4L11652 5/8"x4 3/8"x24 1/8" (16x112x612) STEP 51 WASHER LOCK EXT 12x19 BLK (4 PLCS) NUT BARREL WH 5/16x5/8 (4 PLCS) NUT BARREL WH 5/16x5/8 (4 PLCS) (8) L BRACKET 51x32x82x3.
(1) ROCKWALL ASSEMBLY STEP 52 BOLT WH 5/16x1 1/4 BLK (2 PLCS) WASHER LOCK EXT 8x19 BLK (2 PLCS) T-NUT 5/16 BLK (2 PLCS) ROCKWALL ASSEMBLY 92 (2) WASHER LOCK EXT 8x19 BLK (2) (2) BOLT WH 5/16x1 1/4 BLK T-NUT 5/16 BLK
(1) - CLIMBING ROPE - A6P00260 STEP 53 TIE KNOT T TIE KNOTS APPROXIMATELY AS SHOWN CLIMBING ROPE TIE KNOT 93
(1) QU - SLIDE VF 10 FT - A100287 (1) O70 - SLIDE MOUNTING BOARD - W4L09040 5/8"x1 3/8"x20 3/8" (16x34x517) STEP 54 4 O70 (3) BOLT WH 5/16x1 1/2 (4) SCREW PFH 8x1-1/8" (3) T-NUT 5/16 7 1/16 CENTER SLIDE & DRILL 3/8" (10mm) HOLES THROUGH FLOOR (3) WASHER LOCK EXT 8x19 BOLT WH 5/16x1 1/2 (3 PLCS) WASHER LOCK EXT 8x19 (3 PLCS) O70 T-NUT 5/16 (3 PLCS) SLIDE VF 10 FT 94 SCREW PFH 8x1-1/8" (4 PLCS)
(1) SWING BEAM ASSEMBLY STEP 55 NOTE PILOT HOLES WASHER FLAT 8x27 BLK (4 PLCS) WASHER SPLIT 5/16 BLK (4 PLCS) (4) WASHER FLAT 8x27 BLK (4) WASHER SPLIT 5/16 BLK BOLT HEX 5/16x1 1/4 BLK (4 PLCS) (4) BOLT HEX 5/16x1 1/4 BLK SWING BEAM ASSEMBLY 95
(1) HC - BYD ID TAG (LARGE) WITHOUT AGES - A100242 STEP 56 ALIGN ID TAG IN THE CENTER OF SWING BEAM (4) SCREW PWH 8x1/2 BLK BYD ID TAG (LARGE) WITHOUT AGES SCREW PWH 8x1/2 BLK (4 PLCS) 96
(4) EZ - CHAIN GREEN 51.25" - A100068 (4) FA - QUICK LINK - A100069 (2) - SWING SEAT GREEN 22IN - A6P00054 (1) - 21" WEB SWING SEAT - A6P00285 STEP 57 TIGHTEN QUICK LINK INSERT CHAIN INTO QUICK LINK 21" WEB SWING SEAT CHAIN GREEN 51.
WEB SWING SETUP INSTRUCTIONS: FOLLOW INSTRUCTIONS BELOW BEFORE USING THE WEB SWING. IMPORTANT: SWING MUST BE SET AT A MINIMUM OF 8 INCHES OFF THE GROUND WHEN INSTALLED. IMPORTANT: TO ENSURE STRAIGHT SWINGING MOTION, ADJUST ALL (4) "S" BRACKETS UNTIL WEB SEAT IS LEVEL. Note: It is important that the web swing hang level. IMPORTANT: MAKE SURE THE (4) LOOPS ARE IN A SYMMETRICAL PATTERN BEFORE SWINGING. (SEE BELOW).
(6) - GROUND STAKE REBAR - A4M00527 STEP 58 Anchoring Instructions TAP IN GROUND STAKES AT AN APPROXIMATE 45° ANGLE AT THE LOCATIONS SHOWN. USING GROUND STAKES AS A GUIDE, DRILL 7/16" DIA HOLES.
