Instructions / Assembly

4' Rock Ladder

Phase 1

Phase Notes

• Assemble slats to rails as shown.

• Note oreintation of slats, be sure to arrange as shown.

• See drawing below for slat spacing on rails.

• Using slats as a guide, pre-drill top edges of rails

with a 1/8" drill bit. Failure to pre-drill may result in

board splitting.

TOP

M72

M71

SCREW PFH 8x1-1/2

H73

THESE SURFACES FLUSH BOTH SIDES

PRE-DRILL TOP EDGE OF RAILS

2 15/16

TYPICAL SLAT SPACING

7 SPACES

ALIGN FRONT EDGE OF SLAT WITH TOP OF RAIL

QTY. DESCRIPTION

2 ROCK WALL RAIL

6 ROCK BOARD

2 ROCK WALL SLAT

32 SCREW PFH 8x1-1/2