Instructions / Assembly

Fort Assembly
Phase 2
Phase Notes
• Assemble with hardware as shown.
• For ease during assembly, assemble
uprights flat on the ground.
Parts needed:
• (1) K4 - FORT GROUND BOARD - W101161
• (1) E3 - FORT UPRIGHT - W101175
• (1) E4 - FORT UPRIGHT - W101176
• (1) H4 - CENTER FLOOR SUPPORT - W101182
• (1) K6 - ARCHED FORT RAIL - W101174
• (1) H1 - ROOF CROSS BRACE - W101162
Hardware needed:
• (2) K - BOLT WH 5/16x2 - H100012
• (12) AC - WASHER LOCK EXT 8x19 - H100030
• (10) AD - WASHER LOCK EXT 12x19 - H100031
• (10) D - NUT BARREL WH 5/16x7/8 - H100005
• (8) H - BOLT WH 5/16x1-1/2 - H100010
• (2) L - BOLT WH 5/16x2-1/4 - H100013
• (2) BG - T-NUT 5/16 - H100074
Step 1:
Attach 'H1' Roof Cross Brace to
'E3' & 'E4' Fort Uprights using hardware
'K', 'AC', 'AD' and 'D', as shown.
K
AC
AD
D
H1
E3
E4
H
AC
AD
D
K6
BG
AC
L
H4
H
AC
AD
D
K4
Step 2:
Attach 'K6' Arched Fort Rail to
'E3' & 'E4' Fort Uprights using hardware
'H', 'AC', 'AD' and 'D', as shown.
Step 3: Attach 'H4' Center Floor
Support to 'E3' & 'E4' Fort Uprights
using hardware 'L', 'AC' and 'BG', as
shown.
Step 4: Attach 'K4' Fort Ground Board
to 'E3' & 'E4' Fort Uprights using
hardware 'H', 'AC', 'AD' and 'D', as
shown.
Note: It is vital that the fort
be level before and after
each phase of assembly.