Instructions / Assembly

Fort Assembly
Phase 14
Parts needed:
• (2) D1 - TABLE TOP BRACE - W101199
• (3) M7 - TABLE TOP BOARD - W101198
Hardware needed:
• (4) D - NUT BARREL WH 5/16x7/8 - H100005
• (4) AD - WASHER LOCK EXT12x19 - H100031
• (4) AC - WASHER LOCK EXT8x19 - H100030
• (4) M - BOLT WH 5/16x2-1/2 - H100014
• (6) BP - SCREW PFH 8x1-1/2 - H100086
Phase Notes
• Assemble with hardware as shown.
M
AC
AD
D
BP
M7
D1
E6
Step 1:
Attach 'D1' Table Top Brace to 'E6'
pergola uprights using Safe-T-Fuse hardware,
as shown.
Step 2: Pre-drill & attach 'M7' Table Top
Boards to the top edges of 'D1' table top
braces using Screws 'BP', as shown.
Note:
Do not overtighten screws, overtightening
may cause the screw to stick through the boards
and may cause sharp points. The head of the
screw should NOT sink into the wood for this
phase, it should be flush.
To prevent board splitting, you
must pre-drill each board with
a 1/8" drill bit, before attaching.
E6