Instructions / Assembly

AJ
BX
CD
BG
GD
G1
Swing Beam Attachment
Phase 25
Phase Notes
• Assemble with hardware as shown.
Parts needed:
• (1) SWING BEAM ASSEMBLY
• (1) HC - BACKYARD DISCOVERY ID TAG - A100164
Hardware needed:
• (4) BG - T-NUT 5/16 - H100074
• (4) BX - WASHER SPLIT 5/16 - H100095
• (4) CD - WASHER FLAT 8x27 - H100105
• (4) AJ - BOLT HEX 5/16x1-1/4 - H100042
• (4) BC - SCREW PWH 8x3/4 - H100070
Step 1:
Attach the Swing Beam Assembly to 'G1'
swing beam attachment rail using Bolts 'AJ',
Washer 'BX' & Washer 'CD' through the angle
brackets & 'G1' attachment rail and into T-Nuts 'BG'
that will need to be hammered in the holes on the
backside of 'G1', as shown.
Step 2:
Attach Backyard Discovery ID
Tag 'HC' to Swing Beam 'SB70' using
Screws 'BC', as shown.
SWING BEAM ASSEMBLY
BC
HC
SB70