Instructions / Assembly

B
AD
CM
Phase Notes
• Assemble with hardware as shown.
Slide Attachment
Phase 26
Hardware needed:
• (3) B - NUT BARREL WH 5/16x5/8 - H100004
• (3) AD - WASHER LOCK EXT 12x19 - H100031
• (3) CM - BOLT WH 5/16x1/2 - H100115
Parts needed:
• (1) SLIDE ASSEMBLY
Step 3:
Attach the Slide Assembly to
the fort floor using the Safe-T-Fuse
hardware, as shown.
Step 1:
Center the
wave slide assembly
in the opening
opposite the swing
beam assembly, as
shown.
Step 2:
Using a drill with a
5/16" bit, drill a hole through
the holes on the slide and
through the fort floor.
SLIDE ASSEMBLY
To prevent board splitting, you
must pre-drill each board with
a 5/16" drill bit, before attaching.